基于小冲杆试验的TC4合金氢脆行为和机理研究  

Hydrogen Embrittlement Behavior and Mechanisms of Ti-6Al-4V Alloy Based on Small Punch Test

作　　者：王贤 朱荣涛[1] 李超永 王香 黄鹏飞 Wang Xian;Zhu Rongtao;Li Chaoyong;Wang Xiang;Huang Pengfei(School of Chemical Engineering and Technology,China University of Mining and Technolo gy,Xuzhou 221116,China)

机构地区：[1]中国矿业大学化工学院,江苏徐州221116

出　　处：《稀有金属材料与工程》2020年第11期3769-3775,共7页Rare Metal Materials and Engineering

基　　金：Fundamental Research Funds for the Central Universities(2019GF08)。

摘　　要：Ti-6Al-4V(TC4)合金广泛应用于海洋和航空领域,其恶劣的使用环境容易引发氢脆(HE)失效而使得TC4的机械性能退化,导致突然的灾难性断裂。为了研究TC4合金的氢脆行为和机理,首先采用小冲杆试验(SPT)测试了TC4合金在不同充氢时间下的力学性能。然后,利用原子力显微镜(AFM)和X射线衍射(XRD)仪对TC4合金在不同充氢时间下的氢分布和相转变进行了研究。小冲杆试验(SPT)拟合数据显示,随着充氢时间的增加,TC4合金的强度和伸长率均发生明显的劣化,同时其宏观断口形态由韧性向脆性转变。与此同时,还证明了电解充氢后氢化物的生成是导致TC4合金氢脆现象产生的主要原因。本研究结果为在役TC4设备的氢脆性能检测提供了一种有效、简便的方法。Ti-6Al-4V(TC4)alloy is widely used in the field of marine and aviation,and its severe service environment is easy to induce hydrogen embrittlement(HE)which can cause the degradation of mechanical properties and a s udden catastrophic fracture for the material.To investigate the HE behavior and mechanisms,mechanical properties of the TC4 alloy after different electrochemical hydrogen charging(EHC)time were measured by small punch test(SPT)first.Then,hydrogen distribution and the phase transition of the TC4 alloy with different EHC time were discussed by the atomic force microscopy(AFM)and X-ray diffraction(XRD)techniques.The strength and elongation obtained from SPT fitting data show obvious deterioration with the increase of EHC time while the macroscopic fracture morphology of the TC4 alloy exhibits a transformation from ductile mode to brittle mode.At the same time,the generation of hydride after EHC is proved a main contributor to the HE of the TC4 alloy.The results in this paper provide an effective and convenient method to assess the HE behavior of TC4 alloy in service.

关 键 词：TC4合金 氢脆 小冲杆试验 氢分布 相转变 

分 类 号：TG146.23[一般工业技术—材料科学与工程]