印染废水处理及达标排放工程改造实例  

An Example of Engineering Transformation for Dyeing Wastewater Treatment and Standard Discharge

作　　者：崔俊峰[1] 王俊[1] 段文杰[1] 李宾宾 田振邦[1] 赵亮[1] CUI Junfeng;WANG Jun;DUAN Wenjie;LI Binbin;TIAN Zhenbang;ZHAO Liang(Institute of Chemistry Co.Lad.,Henan Academy of Sciences,Zhengzhou 450002,China)

机构地区：[1]河南省科学院化学研究所有限公司,河南郑州450002

出　　处：《水处理技术》2020年第12期138-140,共3页Technology of Water Treatment

基　　金：河南省重大科技专项(181100310100);河南省科学院产业转型攻坚科技支撑专项(18GJ03003)。

摘　　要：针对某印染厂的废水水质特点,设计相应的预处理改造方案,对其高有机磷阻燃废水和含聚乙烯醇退浆废水分别进行预处理,以保障生化处理系统的稳定运行。同时,为了保障外排水稳定达标,对二沉池出水进行深度处理。工程改造后,运行稳定,达到了相应的污水排放要求。According to the water quality characteristics of the waste water from a printing and dyeing plant, the corresponding pretreatment and transformation scheme was designed to pretreat the high organophosphorus flame retardant wastewater and the polyvinyl alcohol-containing desizing wastewater respectively, so as to ensure the stable operation of the biochemical treatment system.At the same time, in order to ensure that the external drainage reaches the standard stably, the effluent from the secondary sedimentation tank was treated deeply. After the project transformation, the operation was stable and the corresponding sewage discharge standard was reached.

关 键 词：印染废水 阻燃布 聚乙烯醇 芬顿氧化 絮凝沉淀 

分 类 号：X791[环境科学与工程—环境工程]