发电机转子励磁端盲孔的加工工艺  

Processing technology of blind hole at excitation end of generator rotor

作　　者：张琳琳[1] 王俊[1] ZHANG Lin-lin;WANG Jun(Department of Mechanical and Electronic Engineering,Fushun Vocational Technology Institute,Fushun Liaoning 113122)

机构地区：[1]抚顺职业技术学院机械与电子工程系,辽宁抚顺113122

出　　处：《辽宁师专学报（自然科学版）》2020年第3期85-88,共4页Journal of Liaoning Normal College(Natural Science Edition)

基　　金：2019年辽宁省现代学徒制研究项目(201997)。

摘　　要：为提高发电机转子励磁端盲孔的加工精度,提出合理的加工工序、给出相应的切削参数等改进措施,指出部分加工工艺中的注意事项,并对加工结果进行了分析.实践表明:所提措施确保了励磁端盲孔加工质量,从而保障了发电机整体的安全运转,并延长了发电机使用寿命.In order to improve the processing accuracy of blind hole at the excitation end of the generator rotor,we proposed the improvement measures of the reasonable processing procedure and the corresponding cutting parameters,pointed out some matters for attention in the processing technology,and analyzed the processing results.The practice shows that the proposed measures ensure the processing quality of the blind hole at the excitation end,protect the overall safe operation of the generator,and extend the service life of the generator.

关 键 词：励磁端盲孔 转子 切削参数 刀具参数 

分 类 号：TM315[电气工程—电机]