检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李剑波 LI Jianbo(China Road&Bridge Corporation,Beijing 100011,China)
出 处:《路基工程》2020年第6期210-214,共5页Subgrade Engineering
摘 要:贵州铜仁某二级公路边坡在施工时出现滑移,通过现场勘测裂缝位置、形态,估计滑移面位置,并结合地质钻探确定地层厚度与类型。运用Geo-slope软件进行滑坡模拟,根据边坡现状反演地层参数,采取设置抗滑桩加固措施,边坡稳定安全系数达到1.275,满足规范要求。施工期对主滑断面实施滑坡监测,测点水平位移与竖向位移均不超过20 mm,表明该滑坡治理效果显著。Slippage appeared during the construction of a secondary highway slope in Tongren,Guizhou.The location and morphology of fractures are investigated on site to estimate the location of slip plane and the formation thickness and type are determined by combining with geological drilling.The Geo-slope software is used to simulate the landslide.According to the current situation of the slope,the stratum parameters are inversed,and the anti-slide pile is set to reinforce the slope,so that the slope stability safety factor reaches 1.275,which meets the requirements of the specification.The horizontal and vertical displacements of the monitoring points are less than 20 mm by carrying out landslide monitoring during the construction of the main sliding section,which indicates that the landslide control effect is remarkable.
关 键 词:滑坡 裂缝 地质钻探 Geo-slope 抗滑桩 位移监测 安全稳定系数
分 类 号:P642.22[天文地球—工程地质学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15