基于UG NX12.0的诱导轮四轴联动加工研究  

Research on four-axis linkage machining of inducer based on UG NX12.0

作　　者：佛新岗[1] Fo Xingang(Xi’an Aeronautical Vocation and Technical College,Xi’an 710089,China)

机构地区：[1]西安航空职业技术学院,西安710089

出　　处：《现代制造工程》2020年第12期111-115,共5页Modern Manufacturing Engineering

基　　金：陕西省教育厅科研计划项目(17JK0402);西安航空职业技术学院2017年度科研计划项目(17XHZH-016)。

摘　　要：诱导轮传统的制造方式是采用铸造成型工艺技术,铸造成品率很低,质量不能保证。针对某航空企业的生产要求,以UG NX12.0软件为平台,制订加工策略,通过UG/Post Builder软件开发专用的后处理程序,NC程序代码经过VERICUT仿真软件的优化和验证,无过切、少切和碰撞等情况发生。通过立式四轴联动加工中心进行整体铣制,设计科学、合理的加工工艺方案和工艺装备,实现零件的装夹、找正以及精加工,从而提高诱导轮的产品质量。The traditional casting technology is used in inducer processing,the casting yield is very low,and the quality can not be guaranteed.According to the production requirements of an aviation enterprise,the processing strategy was formulated,using UG NX 12.0 software as the platform.The special post-processing program was developed by using UG/Post Builder software.The NC program code was optimized and verified by VERICUT simulation software,without over cutting,less cutting,collision and other situations.Through the overall milling of vertical four-axis linkage machining center,scientific and reasonable processing technology scheme and process equipment were designed to realize the clamping,alignment and finishing of the part,so that the product quality of the inducer could be improved.

关 键 词：诱导轮 加工策略 后处理 VERICUT软件 四轴联动 

分 类 号：TH164[机械工程—机械制造及自动化]