药型罩材料对射流侵彻高强度混凝土影响研究  

Influence of Liner Material on Penetration Capability by Jet into High Strength Concrete

作　　者：张晓伟 肖强强[1] 黄正祥[1] 祖旭东[1] 贾鑫[1] 马彬[1] ZHANG Xiaowei;XIAO Qiangqiang;HUANG Zhengxiang;ZU Xudong;JIA Xin;MA Bin(School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China)

机构地区：[1]南京理工大学机械工程学院,南京210094

出　　处：《弹箭与制导学报》2020年第5期1-4,9,共5页Journal of Projectiles,Rockets,Missiles and Guidance

基　　金：国家自然科学基金青年基金(11702144)资助。

摘　　要：为了研究铜、铁、钛、铝材料射流对高强度混凝土的侵彻特性,在铜药型罩基础上改变壁厚获得铁、钛、铝结构,进而对射流成型进行数值模拟,同时对侵彻高强度混凝土进行了静态威力试验。结果表明:铜、铁、钛射流侵深基本服从密度法则,随密度下降侵深逐渐减小,铝射流侵深略大于钛射流;钛射流孔径最大、开孔容积最大、其开孔效率最高。To study the penetration characteristics of Cu-OFHC,Steel,Ti,Al jet on the high-strength concrete,the structures of the Steel,Ti,Al jets were obtained by changing the wall thickness on the basis of the Cu-OFHC liner structure,and then the numerical simulation of the jet formation was carried out,at the same time,the static power test was carried out on the penetration high-strength concrete.The results showed that the penetration of Cu-OFHC,Steel,Ti jet basically obeys the density rule:with the decrease of the density,the penetration goes down.The penetration of Al jet was slightly larger than that of Ti jet.Both of the cavity diameters and volume of Ti jet were the largest,and the efficiency of the penetration of the Ti jet was the highest in the four materials.

关 键 词：药型罩材料 高强度混凝土 侵彻深度 开孔孔径 开孔容积 

分 类 号：O385[理学—流体力学] TJ410.333[理学—力学]