检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:肖俊先 王珂 李林山 董国琴 徐浩 XIAO Junxian;WANG Ke;LI Linshan;DONG Guoqin;XU Hao(Hunan Xiangdian Test and Research Institute Co.,Ltd.,Changsha 410004,China;State Grid Yueyang Power Supply Company,Yueyang 414000,China;State Grid Hunan Electric Power Research Institute of Electric Power Research,Changsha 410007,China)
机构地区:[1]湖南省湘电试验研究院有限公司,湖南长沙410004 [2]国网湖南省电力有限公司岳阳供电分公司,湖南岳阳414000 [3]国网湖南省电力有限公司电力科学研究院,湖南长沙410007
出 处:《湖南电力》2020年第6期88-91,共4页Hunan Electric Power
摘 要:以智能变电站主变压器零序过电压保护误动作事件为例,通过对故障波形、现场接线方式及二次回路进行分析,阐明零序过电压保护误动作的原因,指出变压器零序过电压保护整定及二次回路存在的问题,并有针对性地提出了变压器零序过电压保护的整改及预控措施,保证设备的可靠运行。Taking the recent misoperation of the zero-sequence overvoltage protection of the main transformer in the intelligent substation as an example,the causes of the misoperation of the zero-sequence overvoltage protection are explained through the analysis of the fault waveform,the field connection mode and the secondary circuit.This paper points out the problems existing in the setting of zero-sequence over-voltage protection and the secondary circuit of transformer,and puts forward the rectification and pre-control measures for zero-sequence over-voltage protection of transformer to ensure the reliable operation of equipment.
关 键 词:变电站 零序过电压 二次回路 寄生回路 应对措施
分 类 号:TM774[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.119.140.58