高强耐候钢性能稳定性控制技术研究  

Study on Performance Stability Control Technology of High Strength Weatherable Steel

作　　者：刘晓翠 张转转[1] 李文远[2] 刘锟[2] 周娜[1] LIU Xiaocui;ZHANG Zhuanzhuan;LI Wenyuan;LIU Kun;ZHOU Na(Beijing Shougang Co.,Ltd.,Qian'an 064404,China;Thin Plate Institute of Shougang Technology Institute,Beijing 100043,China)

机构地区：[1]北京首钢股份有限公司,河北迁安064404 [2]首钢技术研究院薄板所,北京100043

出　　处：《热加工工艺》2020年第23期91-94,共4页Hot Working Technology

基　　金：国家重点研发计划资助项目(2017YFB0304600,2017YFB0304602)。

摘　　要：对高强耐候钢进行了窄范围成分控制和温度控制尤其是层流冷却中间温度(MT)控制。当MT处于600~680℃时,可取得细晶强化和析出强化之间的平衡,得到均匀稳定力学性能的高强耐候钢;此时,钢的屈服强度均值达到746 MPa,抗拉强度均值达到804 MPa,断后伸长率为26%,晶粒度达到13级。The narrow-range component control and temperature control, especially laminar cooling intermediate temperature(MT) control for high strength weather resistant steel were carried out. When the MT is 600℃, the balance between fine grain strengthening and precipitation strengthening can be obtained, and the high strength weather resistant steel with uniform and stable mechanical properties is obtained. Under this conditions, the average yield strength of the steel is 746 MPa, the average tensile strength is 804 MPa, the elongation after break is 26%, and the grain size is 13 grade.

关 键 词：高强耐候钢 性能稳定性 层流冷却中间温度(MT) 

分 类 号：TG335.11[金属学及工艺—金属压力加工]