加氢筒节锻造缺陷模拟分析  

Simulation Analysis to Forging Defects in Shell Sections of Hydrogenation Reactors

作　　者：韩兴 张雪姣 赵凯兵 赵晓龙 Han Xing;Zhang Xuejiao;Zhao Kaibing;Zhao Xiaolong

机构地区：[1]一重集团天津重型装备工程研究有限公司,天津300457 [2]一重集团铸锻钢事业部,黑龙江富拉尔基161042 [3]一重集团大连工程技术有限公司,辽宁大连116600

出　　处：《一重技术》2020年第5期25-31,共7页CFHI Technology

基　　金：天津市科技计划项目(17YFZCGX00900)

摘　　要：对加氢钢锭增加预拔长与否及镦粗时水、冒口朝向等四种工艺方案进行模拟分析。在原始钢锭的水、冒口端固定位置设置追踪点,对比分析冲孔后追踪点距内孔表面与距端面距离。结果表明:改变墩粗时水、冒口的朝向,增加预拔长工艺对追踪点位置有影响,而且通过追踪点可以反推出缺陷在原始钢锭中的位置。Four process plans to determine whether pre-drawing process is necessary and the orientation of the nozzle and riser during upsetting are analyzed by means of simulation.The distances of the tacking point on an original ingot to the inner hole surface and to the end surface compare with that of the tracking point after punching.The result shows that changing the orientation of the nozzle and riser during upsetting and involving pre-drawing process can change the tracking point position.The position of a defect in original ingot can be determined with the change of tracking point position.

关 键 词：缺陷追踪 加氢筒节 数值模拟 

分 类 号：TG316.1[金属学及工艺—金属压力加工]