中和结晶参数对纯氧化钼中钨含量的影响  

EFFECT OF NEUTRALIZATION CRYSTALLIZATION PARAMETERS ON TUNGSTEN CONTENT IN PURE MOLYBDENUM OXIDE

作　　者：姚成 厉学武[1] 罗建海[1] 曹维成[1] 唐丽霞[1] 郭军刚[1] YAO Cheng;LI Xue-wu;LUO Jian-hai;CAO Wei-cheng;TANG Li-xia;GUO Jun-gang(Technical Center,Jinduicheng Molybdenum Co.Ltd.,Xi’an 710077,Shaanxi,China)

机构地区：[1]金堆城钼业股份有限公司技术中心,陕西西安710077

出　　处：《中国钼业》2020年第6期53-55,共3页China Molybdenum Industry

基　　金：国家重点研发计划(编号2017YFB0305404)。

摘　　要：分别研究了钼酸铵溶液钼含量、中和结晶温度、中和结晶终点pH对纯氧化钼制备过程中钨含量的影响,得出了中和结晶最佳的钼酸铵溶液钼含量、结晶温度、结晶终点pH值,制备出的低钨纯氧化钼的钨含量为0.0021%(质量分数)。The influences of molybdenum content in ammonium molybdate solution,neutralization crystallization temperature,and pH value of neutralization crystallization end point on tungsten content in pure molybdenum oxide were studied.The optimum content of molybdenum in ammonium molybdate solution,crystallization temperature and pH value of crystallization end point in neutralization crystallization process were obtained,and the tungsten content of the prepared low-tungsten pure molybdenum oxide was 0.0021 wt%.

关 键 词：中和结晶 钼含量 结晶温度 纯氧化钼 

分 类 号：TF124[冶金工程—粉末冶金]