基于铝基复合材料热处理羽毛球拍杆性能分析  

Performance Analysis of Heat-treated Badminton Racket Based on Aluminum Matrix Composite

作　　者：李维强[1] LI Weiqiang(Shaanxi Institute of International Trade&Commerce,Xi'an 712046,China)

机构地区：[1]陕西国际商贸学院,陕西西安712046

出　　处：《工业加热》2020年第12期53-55,共3页Industrial Heating

基　　金：陕西省健康文化研究中心项目(JKWH2019-Q21)。

摘　　要：铝基复合材料热处理羽毛球拍杆的力学性能取决于基体界面与增强颗粒之间的结合度。因此,本次研究通过热处理的方式对铝基复合材料的力学性能加以强化,经实验研究发现,双级固溶相比于单组固溶来说可以实现更大的固溶度,提升铝基复合材料羽毛球拍杆性能的最佳热处理方法为440℃/3h+480℃/2h双级固溶。The mechanical properties of the heat-treated composite badminton racket rod made of aluminum matrix composite depend on the combination between the matrix interface and the reinforced particles. Therefore,in this study,the mechanical properties of aluminum matrix composite were strengthened by heat treatment. It was found that the two-stage solution can achieve greater solid solubility than the single group solution. The best heat treatment method to improve the performance of aluminum matrix composite badminton racket is 440 ℃/3 h +480 ℃/2 h two-stage solution.

关 键 词：铝基复合材料 力学性能 热处理 

分 类 号：TB331[一般工业技术—材料科学与工程]