PP/PET皮芯型热熔单丝纺丝成型工艺研究  

Study on spinning process of PP/PET skin-core hot-melt monofilament

作　　者：邵小群 马海军 张书勤 孙飞宇 Shao Xiaoqun;Ma Haijun;Zhang Shuqin;Sun Feiyu(Nantong NTEC Monofilament Technology Co.Ltd.,Nantong 226003,China)

机构地区：[1]南通新帝克单丝科技股份有限公司,江苏南通226003

出　　处：《纺织报告》2020年第10期27-29,35,共4页

基　　金：国家重点研发计划重点专项(2016YFB0303100)。

摘　　要：以聚对苯二甲酸乙二醇酯(PET)和聚丙烯(PP)为原料,通过复合纺丝、液体冷却、二级拉伸工艺制备不同直径的PP/PET皮芯型热熔复合单丝,采用扫描电镜、差热分析法、电子单纱强力仪进行分析表征,研究了复合比例、液体冷却水温、拉伸倍率、拉伸温度、热定型温度等工艺参数对PP/PET热熔单丝力学性能的影响。研究表明,当冷却水温为20℃时,二级拉伸倍率为6倍,热水拉伸温度为90℃,热风拉伸温度为160℃,热定型温度为160℃,制得的PP/PET热熔单丝力学性能较好。Using polyethylene terephthalate(PET)and polypropylene(PP)as raw materials,PP/PET core-type hot-melt composite monofilament with different diameters was prepared by composite spinning,liquid cooling and two-stage drawing process.The effects of composite ratio,liquid cooling water temperature,tensile rate,tensile temperature and thermal setting temperature on the mechanical properties of hot-melt monofilament were studied by scanning electron microscope,differential thermal analysis method and electronic single yarn strength meter.The results show that when the cooling water temperature is 20℃,the secondary tensile rate is 6 times,the hot water tensile temperature is 90℃,the hot air tensile temperature is 160℃,and the thermal setting temperature is 160℃,the mechanical properties of the PP/PET hot melt monofilament are better.

关 键 词：PP PET 复合纺丝 液体冷却 

分 类 号：TS15[轻工技术与工程—纺织材料与纺织品设计]