转轮浓缩−催化燃烧净化金属漆涂装有机废气  

Purification of organic exhaust gas from metallic painting by zeolite rotor concentration and catalytic combustion

作　　者：余子睿 刘昳帆 郭珊珊 姚露露 王生英 金科 顾震宇 赵伟荣[1] YU Zirui;LIU Yifan;GUO Shanshan;YAO Lulu;WANG Shengying;JIN Ke;GU Zhenyu;ZHAO Weirong(Department of Environmental Engineering Zhejiang University,Hangzhou 310058,China)

机构地区：[1]浙江大学环境工程系,浙江杭州310058 [2]江苏安琪尔废气净化有限公司,江苏宜兴214200 [3]浙江恒荣环保科技有限公司,浙江丽水323000 [4]杭州双博环保科技有限公司,浙江杭州310058 [5]浙江省生态环境科学设计院,浙江杭州310007

出　　处：《电镀与涂饰》2020年第24期1794-1798,共5页Electroplating & Finishing

基　　金：国家自然科学基金(51778564);浙江省重点研发计划项目(2019C03113)。

摘　　要：为解决金属漆涂装废气风量大、浓度低、含漆雾难处理等问题,采用干式布袋除尘−沸石转轮−旋转式蓄热催化燃烧(RRCO)工艺对废气进行处理。结果表明,转轮最佳脱附温度为170~180°C,最佳转速3 r/h,催化燃烧温度400°C。运行3个月后催化转化率仍可稳定达到97%,系统废气处理率稳定在90%以上,挥发性有机物(VOCs)排放浓度低于DB 33/2146–2018《工业涂装工序大气污染物排放标准》的限值。To solve the problems of organic exhaust gas generated by coating process of metallic paints such as large air volume,low concentration,and difficulty in the treatment of paint fogs,a process comprising dry-type bag filter,zeolite rotor,and rotating regenerative catalytic oxidizer(RRCO)was used.The results showed that the optimal desorption temperature and rotation speed of the rotor are 170-180°C and 3 r/h,respectively,and the catalytic oxidation temperature should be 400°C.After running for three months,the catalytic conversion rate kept steadily at 97%,the system treatment rate hold firmly at 90%above,and the emission concentration of volatile organic compounds(VOCs)met the requirement of the Emission Standard of Air Pollutants for Industrial Surface Coating(DB 33/2146–2018).

关 键 词：金属漆 涂装 有机废气 干式布袋除尘 沸石转轮 旋转式蓄热催化燃烧 

分 类 号：X515[环境科学与工程—环境工程] X788