船用橡胶隔振器冲击刚度曲线试验研究  

Experimental Analysis of the Shock Stiffness Curve of Marine Rubber Isolators

作　　者：钱伟忠 马炳杰 王志刚 王舒楠 程敏霞 Qian Weizhong;Ma Bingjie;Wang Zhigang;Wang Shunan;Cheng Minxia(Department of Ship Repairing,Navy Shanghai District,Shanghai 200090;Shanghai Marine Diesel Engine Research Institute,Shanghai 201108;National Engineering Laboratory for Marine and Ocean Engineering Power System,Shanghai 201108)

机构地区：[1]海军上海地区装备修理监修室,上海200090 [2]七一一研究所,上海201108 [3]船舶与海洋工程动力系统国家工程试验室,上海201108

出　　处：《柴油机》2021年第1期46-48,共3页Diesel Engine

摘　　要：以船用橡胶隔振器为研究对象,通过跌落试验获取了典型橡胶隔振器的冲击刚度曲线,并定量分析了预压和跌落高度对冲击刚度的影响。结果显示:相同位移下,有预压情况测得的刚度曲线比无预压情况得到的曲线其最大位移明显减小;跌落高度越高,即冲击速度越大,冲击刚度也越大。To study marine rubber isolators,the shock stiffness curves of typical rubber isolators were obtained through drop test.And quantitative analysis was carried out on the influence of preload and drop height on shock stiffness.The results show that under the same displacement,the maximum displacement of stiffness curve with preload is obviously smaller than the one without preload.And as the drop height increases,the shock speed increases,thus the shock stiffness increases too.

关 键 词：橡胶隔振器 冲击刚度 预压 跌落试验 

分 类 号：U664[交通运输工程—船舶及航道工程] TB535[交通运输工程—船舶与海洋工程]