检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨志浩[1,2] 岳祖润 冯怀平[1,2] 叶朝良 周江涛[2] 介少龙 YANG Zhi-hao;YUE Zu-run;FENG Huai-ping;YE Chao-liang;ZHOU Jiang-tao;JIE Shao-long(State Key Laboratory of Mechanical Behavior and System Safety of Traffic Engineering Structures,Shijiazhuang Tiedao University,Shijiazhuang,Hebei 050043,China;School of Civil Engineering,Shijiazhuang Tiedao University,Shijiazhuang,Hebei 050043,China)
机构地区:[1]石家庄铁道大学省部共建交通工程结构力学行为与系统安全国家重点实验室,河北石家庄050043 [2]石家庄铁道大学土木工程学院,河北石家庄050043
出 处:《岩土力学》2021年第1期193-202,共10页Rock and Soil Mechanics
基 金:河北省自然科学基金项目(No.E2019210137);中国铁路总公司科技研究开发计划项目(No.2017G008-G,No.2017G002-W,No.2017G008-A)。
摘 要:重载铁路基床表层级配碎石渗透系数的快速、精确测定,对工程施工质量及工期的保证具有重要意义。基于达西定律研制适用于级配碎石的大型常水头渗透试验装置,并利用该装置考虑边壁效应进行一系列渗透试验,探究试样孔隙比e、不均匀系数Cu及特征粒径参数对其渗透系数K20的影响程度及规律。结合试验数据,以太沙基模型为基础,建立同时考虑孔隙及级配特征参数的渗透系数改进计算模型,并通过试验验证其精确性。结果表明:级配碎石的K20与其e2、平均粒径平方d502呈线性关系,与Cu呈负指数关系;d50对K20的影响权重最大,Cu次之,e最小;提出的计算模型具有较高准确性,可为新建重载铁路基床表层施工中填料渗透系数的快速测定及运营路基基床的渗透稳定性评估提供参考。Rapid and accurate measurement of permeability coefficient for the graded macadam used in heavy-haul railway subgrade bed surface layer is of great significance to guarantee the construction quality and period.First,a large-scale constant-head permeameter suitable for graded macadam was developed based on Darcy’s Law,and a series of penetration tests considering wall effects was carried out using the aforementioned device.These initial tests were conducted to explore the influence degree and properties of pore ratio e,unevenness coefficient Cu,and characteristic particle size parameters on the permeability coefficient K20of a specimen.Besides,based on the Terzaghi model,an improved calculation model that took into account both pore and gradation characteristic parameters was established with reference to test data,and the accuracy of the model was verified through experiments.The results show that the graded macadam permeability coefficient K20 has a linear relationship with e2 and the square of mean particle size d502,and has a negative exponential relationship with Cu;d50 has the greatest influence weight on K20,followed by Cu,and e has the smallest influence.The proposed calculation model demonstrates a high degree of accuracy and can provide a reference for rapid determination of permeability coefficient for the fillers used in newly heavy haul railway subgrade bed surface layer under construction.Using this calculation model,the permeability stability of operating subgrade beds can be evaluated.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222