回转窑的调测方法  

Kiln Measuring and Adjusting Method for Rotary Kiln

作　　者：赵鑫磊 ZHAO Xinlei(Pingyin Shanshui Cement Co.,Ltd.,Pingyin Shandong 250409,China)

机构地区：[1]平阴山水水泥有限公司,山东平阴250409

出　　处：《水泥技术》2021年第1期31-33,共3页Cement Technology

摘　　要：对回转窑进行检修后,因原有配件存在不同程度的磨损,开机后大齿圈出现振动,需停窑进行调整。根据测得的回转窑各档标高、大齿圈各项数据,对回转窑进行了调整,调整后,回转窑运行平稳,小齿轮轴向、水平、垂直三个方向的振动值均≯2.5mm,各档托轮瓦温稳定在38~43℃之间。After the rotary kiln is overhauled,the original fittings are worn to varying degrees,and the big gear ring vibrates after starting,so the kiln requires to be stopped for adjustment.According to the measured data of each gear elevation and big gear ring,the rotary kiln is adjusted.After adjustment,the rotary kiln runs smoothly,the vibration values of the pinion in axial,horizontal and vertical direc⁃tions are all≯2.5mm,and the temperature of the roller shoe in each gear is stable between 38℃and 43℃.

关 键 词：回转窑 大齿圈 小齿轮 齿顶隙 

分 类 号：TQ172.622.29[化学工程—水泥工业]