基于Abques的YG-170型游车滑轮轴有限元分析  

Finite Element Analysis of YG-170 Traveling Block Sliding Shaft Based on Abques

作　　者：吕宵宵 赵毅红[2] 张志萍[1] LV Xiaoxiao;ZHAO Yihong;ZHANG Zhiping(School of Guangling,Yangzhou Univ.,Yangzhou Jiangsu 225000;School of Mechanical Engineering,Yangzhou Univ.,Yangzhou Jiangsu 225000)

机构地区：[1]扬州大学广陵学院,江苏扬州225000 [2]扬州大学机械工程学院,江苏扬州225000

出　　处：《软件》2020年第12期4-6,共3页Software

基　　金：江苏高校“青蓝工程”资助;扬州大学广陵学院自然科学(ZKZD19002)。

摘　　要：为保证游车主要受力件滑轮轴的使用性能及安全性能,根据API 8C和AMSE的相关标准,对YG-170型的游车滑轮轴进行了有限元分析。利用SolidWorks软件构建滑轮轴的三维实体模型,应用Abques软件对其进行有限元应力应变分析,结合分析结果对滑轮轴在最大钩载条件下的强度、刚度、使用寿命进行校核计算,计算结果完全符合标准要求。Finite element anslysis of YG-170 traveling block Sliding shaft to ensure that meets the Use performance and safety performance,according to the relevant standards of API 8C and AMSE.The 3d solid model of the Sliding shaft was built by SolidWorks,and the finite element stress and strain analysis was carried out with Abques.Combined with the analysis results,the strength,stiffness and service life of the Sliding shaft under the condition of the maximum hook load were checked and calculated,and the calculated results completely meet the requirements of the standards.

关 键 词：滑轮轴 有限元 Abques 

分 类 号：TE923[石油与天然气工程—石油机械设备]