低电压下微能RC脉冲电源放电波形研究  

Study on Discharge Waveform of Micro-energy RC Pulse Power Supply under Low Voltage

作　　者：张桐 陈晓菲 杨晓冬[1] ZHANG Tong;CHEN Xiaofei;YANG Xiaodong(School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,China;Shanghai Institute of Space Propulsion,Shanghai 201112,China;Shanghai Engineering Reasearch Center of Space Engine,Shanghai 201112,China)

机构地区：[1]哈尔滨工业大学机电工程学院,黑龙江哈尔滨150001 [2]上海空间推进研究所,上海201112 [3]上海空间发动机工程技术研究中心,上海201112

出　　处：《电加工与模具》2021年第1期11-14,共4页Electromachining & Mould

基　　金：国家自然科学基金资助项目(51875133);黑龙江省自然科学基金资助项目(LH2020E038)。

摘　　要：RC脉冲电源是微细电火花加工中常用的电源,低开路电压下的微能RC脉冲电源可实现更加微细和精密的电火花加工。针对低开路电压下的微能RC脉冲电源放电波形进行观测,对不同充电电容和开路电压下的充电电容两端电压、放电间隙两端电压及放电回路的电流波形进行了对比和分析。研究发现:由于回路中寄生参数的影响,充电电容两端电压与放电间隙两端电压存在明显区别;由于放电通道存在一定的阻抗,因此沿放电通道存在电势差,这使得低开路电压下的RC脉冲电源极间放电电压也存在维持电压,且易受充电电容的存储电荷量及放电间隙状态等因素影响。RC pulse power supply is commonly used in micro-EDM,with low open circuit voltage micro-energy RC pulse power supply can realize more precise EDM.The discharge waveforms of micro-energy RC pulse power supply under low open circuit voltage were observed,and the voltage across the charging capacitor,the voltages across the discharge gap and the current waveforms of the discharge circuit were compared and analyzed under different charging capacitors and open circuit voltages.The result showed that due to the influence of parasitic parameters in the circuit loop,there is a significant difference between the voltage across the charging capacitor and the voltage across the discharge gap.A certain impedance in the discharge channel leads to a potential difference along the discharge channel,which makes the discharge voltage between the RC pulse power supply electrodes under low open circuit voltage get a sustain voltage,while the sustain voltage is easily affected by factors such as the volume of charge stored in the charging capacitor and state of the discharge gap.

关 键 词：微细电火花加工 RC脉冲电源 放电波形 

分 类 号：TG661[金属学及工艺—金属切削加工及机床]