检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:崔梦麟 李焕兵 胡胜刚[3] 张启培 CUI Meng-lin;LI Huan-bing;HU Sheng-gang;ZHANG Qi-pei(School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China;Tunnel Engineering Department, Wuhan Municipal Construction Group Co., Ltd., Wuhan 430050, China;Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources,Yangtze River Scientific Research Institute, Wuhan 430010, China)
机构地区:[1]武汉理工大学土木工程与建筑学院,武汉430070 [2]武汉市市政建设集团有限公司隧道工程公司,武汉430050 [3]长江科学院水利部岩土力学与工程重点实验室,武汉430010
出 处:《长江科学院院报》2021年第2期114-118,共5页Journal of Changjiang River Scientific Research Institute
基 金:武汉市城建委科技计划项目(201802)。
摘 要:垃圾土的组成成分极其复杂,且具有较强的时空变异性。获得垃圾土准确的承载力与变形特性对后续的大面积填筑土方进行堆山造景及安全的正常运营具有十分重要的意义。然而,对其承载力与变形特性的准确确定十分困难,大尺寸平板载荷试验是较为可靠的方法。通过载荷板尺寸为4 m×4 m的大型平板载荷试验,对武汉市某垃圾场内垃圾土层的工程性能进行了试验,对加载过程中板下沉降、板周边地表沉降与板下分层沉降、板周边深层水平位移进行全过程的监测并进行分析,得出垃圾土层的极限承载力和整体变形特性。试验结果显示出垃圾土层在受荷作用下变形较大且影响深度可达10 m,表现为冲剪破坏模式。试验结果对相似的垃圾场堆填改造工程的实施提供了建议,为今后的垃圾填埋改造工程施工提供了参考。Composed of complex materials,solid waste is strongly variable in spatial and temporal scales.Obtaining the bearing capacity accurately and deformation characteristic of solid waste is of pivotal significance for the subsequent large-scale filling of earthwork for mountain landscaping and safe operation.However,accurately determining the bearing capacity and deformation characteristic of refuse soil is quite challenging.Large-size plate loading test becomes a good choice.We examined the engineering properties of solid waste soil layers in a garbage dump in Wuhan via large-scale plate load test with the loading plate size of 4 m×4 m.By monitoring and analyzing the changes in settlements below plate,soil subsidence in the peripheral of plate,layered settlements below plate,as well as deep horizontal displacement in the peripheral of plate,we obtained the ultimate bearing capacity and overall deformation characteristics of the solid waste.Test results revealed large deformation of the solid waste layer under the action of load,with an effect reaching 10 meters in depth,which is manifested as the punching and shear failure mode.The test results provide suggestions for the implementation of similar landfill reconstruction projects,and also reference for renovation projects of waste landfill in future.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.216.70.76