四种熔盐对熔盐法合成铁铝尖晶石粉的影响  

Effect of four molten salts on synthesis of hercynite powder by molten salt method

在线阅读下载全文

作  者:司超伟 郎杰夫 游杰刚 谭文东 佘以明 Si Chaowei;Lang Jiefu;You Jiegang;Tan Wendong;She Yiming(School of Materials and Metallurgy,University of Science and Technology Liaoning,Anshan 114051,Liaoning,China)

机构地区:[1]辽宁科技大学材料与冶金学院,辽宁鞍山114051

出  处:《耐火材料》2021年第1期77-80,共4页Refractories

基  金:辽宁省教育厅重点基金资助项目(2017LNZD06)。

摘  要:以Fe2O3粉、Al2O3粉和石墨粉为主要原料,分别以NaCl、KCl、NaCl-KCl和NaCl-Na2CO3为熔盐介质,采用熔盐法在1 000℃高纯氮气气氛中保温3 h合成铁铝尖晶石粉,然后对合成铁铝尖晶石粉进行XRD、SEMEDS和粒度分析。结果表明:以NaCl-Na2CO3作为熔盐介质未能合成出铁铝尖晶石,因为Na2CO3与Al2O3在Na2CO3熔点(851℃)以上温度反应生成了Na2Al2O4。以NaCl、KCl和NaCl-KCl作为熔盐介质均能合成出纯度较高的铁铝尖晶石,并且在NaCl-KCl熔盐介质中合成的铁铝尖晶石的平均粒度比在KCl和NaCl熔盐介质中合成的铁铝尖晶石的大,粒度分布也更均匀。Hercynite powders were prepared using Fe 2O 3,Al 2O 3 and graphite powder as the raw materials,NaCl,KCl,NaCl-KCl and NaCl-Na 2CO 3 as the molten salt medium,fired at 1000℃for 3 h in high-purity nitrogen atmosphere by the molten salt method.The synthetic hercynite powders were analyzed by XRD,SEM-EDS and in terms of the particle size.The results show that hercynite is not formed using NaCl-Na 2CO 3 as the molten salt medium,because Na 2CO 3 reacts with Al 2O 3 to form Na 2Al 2O 4 at a temperature above the melting point of Na 2CO 3(851℃);high-purity hercynite can be synthesized using NaCl,KCl or NaCl-KCl as the molten salt medium;when NaCl-KCl is used as the molten salt medium,the average particle size of the hercynite is larger,and the particle distribution is more uniform compared with the one using NaCl or KCl.

关 键 词:熔盐法 铁铝尖晶石 NACL KCL NA2CO3 

分 类 号:TQ175[化学工程—硅酸盐工业]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象