基于Adams/car板簧工具箱的钢板弹簧建模及仿真  

The foundation and simulation of leafspring by Adams/car

作　　者：刘君程 姜家如 宋绍文 罗传东[2] 王涛[2] Liu Juncheng;Jiang Jiaru;Song Shaowen;Luo Chuandong;Wang Tao(Anhui Jianghuai Automobile Group Corp.,Ltd.International Company,Anhui Hefei 230601;Technology Center of Anhui Jianghuai Automobile Group Corp.,Ltd,Anhui Hefei 230601)

机构地区：[1]安徽江淮汽车股份有限公司国际公司,安徽合肥230601 [2]安徽江淮汽车股份有限公司技术中心,安徽合肥230601

出　　处：《汽车实用技术》2021年第4期95-97,共3页Automobile Applied Technology

摘　　要：文章主要基于某车后悬架结构模型,提取建立悬架模型所需参数,利用美国MDI公司开发的Adams/car软件所嵌入的leafspring子模块进行钢板弹簧悬架模型建立,并且详细描述了板簧模型建立过程,进而完成板簧垂向刚度变化对比,形成与该车相对应的板簧悬架动力学模型。在文章最后,对后悬架板簧模型与该车后悬架同向轮跳试验测得各参数变化趋势进行对比,吻合度达到95%以上。This text mainly according to the back of the some car hang a structure pattern,withdraw to create to hang the parameter that a pattern needs,make use of the leafspring son mold mass progress steel plate spring imbeding in the Adams/car software that the United States'MDI company develops to hang a pattern establishment;And vs board Huang pattern create the process carry on detailed present,complete board Huang just the degree changed contrast and forminged the car's contra thus should of the board Huang hangs a kinetics pattern.In this text end,vs behind hang a board Huang pattern and the car behind hang a stand to together jump toward the wheel test to measure each parameter change the trend carry on contrast and fit together a degree to hit above 95%.

关 键 词：钢板弹簧 垂向刚度 同向轮跳 

分 类 号：U461.99[机械工程—车辆工程]