检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黄双福[1] 林春深 黄金耀 袁俊威 HUANG Shuangfu;LIN Chunshen;HUANG Jinyao;YUAN Junwei(College of Zhicheng,Fuzhou University,Fuzhou 350002,China;School of Chemical Engineering,Fuzhou university,Fuzhou 350116,China)
机构地区:[1]福州大学至诚学院,福州350002 [2]福州大学石油化工学院,福州350116
出 处:《流体机械》2021年第2期77-83,共7页Fluid Machinery
基 金:国家基础科学人才培养基金项目(J1103303);福建省中青年教师教育科研项目(JAT191110)。
摘 要:分别对TEC1-12704和TEC1-12706两种型号半导体制冷片的热端进行了散热器有热管散热与散热器无热管散热的试验装置设计,同时设计了分离电流输入两级制冷散热器有热管散热的试验装置,并分析了热端散热工况对冷端温度的影响。试验结果显示:散热器有热管散热可强化热端散热,半导体制冷片冷端温度与散热器散热能力有关,在有限散热能力条件下,冷端温度随输入电流的增加先增大后减小;保证散热能力条件下,冷端温度随输入电流增大而减小、随热端温度减小而减小;对双片TEC1-12706半导体制冷片采用分离电流输入两级制冷,冷端最低温度可达到-38.6℃。试验结果表明:改善热端散热条件能够提高单片半导体制冷片性能,同时在试验测试的最佳散热条件下采用分离电流输入两级制冷可使冷端温度大幅降低,这对提高半导体制冷片工作温差着重要的意义。The radiator with heat pipe and the radiator without heat pipe were designed on the hot ends of two types of semiconductor cooler--TEC1-12704 and TEC1-12706,at the same time,the experimental device for two-stage cooling radiator with heat pipe was designed under the condition of separated current input,and the influence of hot end heat dissipation condition on the cold end temperature was analyzed by the experiment.The experimental results show that the radiator with a heat pipe for dissipation heat can enhance the heat dissipation at the hot end.The cold end temperature of the semiconductor cooler is related to the heat dissipation capacity of the radiator.Under the condition of limited heat dissipation capacity,the temperature of the cold end first increases and then decreases with the increase of the input current.Under the condition of ensuring the heat dissipation capacity,the temperature of the cold end decreases with the increase of the input current,and decreases with the decrease of the temperature of the hot end.The minimum temperature of the cold end can reach-38.6℃when two-stage refrigeration with separated current input is adopted for the two-sheet TEC1-12706 semiconductor cooler.The experimental results show that improving the heat dissipation conditions of the hot end can improve the performance of the monolithic semiconductor cooler.At the same time,the temperature of the cold end can be substantially reduced by using two-stage refrigeration with separated current input under the optimal heat dissipation condition,which is of great significance to improve the working temperature difference of semiconductor cooler.
分 类 号:TH12[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.96