热氢处理炉真空加热温度场数值模拟与分析  

Numerical simulation and analysis of vacuum heating temperature field of hydrogen treatment furnace

作　　者：王同 陆文林 李勍 杜春辉 陈旭阳 薛丹若 Wang Tong;Lu Wenlin;Li Qing;Du Chunhui;Chen Xuyang;Xue Danruo(Beijing Research Institute of Mechanical&Electrical Technology Co.,Ltd.,Beijing 100083,China)

机构地区：[1]北京机电研究所有限公司,北京100083

出　　处：《金属热处理》2021年第2期209-212,共4页Heat Treatment of Metals

基　　金：“高档数控机床与基础制造装备”科技重大专项(2019ZX04017001)。

摘　　要：钛合金热氢处理技术是利用氢在钛合金中的可逆化作用,改善钛合金微观组织与机加工性能的一种新技术。其中,热氢处理炉是钛合金加热渗氢、脱氢的重要设备,加热均匀性和加热效率是加热室设计过程中需考虑的关键技术,会直接影响钛合金热氢处理过程中的效率和质量。针对适用于钛合金的热氢处理炉进行真空加热过程温度场数值模拟分析,建立真空加热数学模型,对空载状态下的数值模拟和试验结果进行比较,二者基本相符,在此基础上深入研究了负载状态下加热功率、发热带宽度等设计参数对加热均匀性和加热效率的影响。结果表明:选择合理的加热功率、发热带宽度能够适当提高加热效率和加热均匀性。Technology of heat hydrogen treatment of titanium alloy is a new technology which can improve the microstructure and machinability of titanium alloy by using the reversible effect of hydrogen in titanium alloy,and the heat hydrogen treatment furnace is an important equipment for hydrogen permeation and dehydrogenation of titanium alloy. The heating uniformity and heating efficiency are important factors to be considered in the design of heating chamber,and also important indexes to measure the performance of heat hydrogen treatment furnace. The design of heating chamber directly affects the efficiency and quality of titanium alloy in the process of heat hydrogen treatment. The numerical simulation of the temperature field in the vacuum heating process of the hydrogen heat treatment furnace suitable for titanium alloy was carried out,and the mathematical model of vacuum heating was established. The comparison of numerical simulation and experiment under no-load condition showed that they were basically consistent. On this basis,the influence of the design parameters,such as the heating power and the heating bandwidth,was carefully studied from the heating efficiency and the heating uniformity under load. The results show that the heating efficiency and heating uniformity can be properly improved by choosing reasonable heating power and width of heating zone.

关 键 词：热氢处理炉 温度场 数值模拟 加热均匀性 

分 类 号：TG156.8[金属学及工艺—热处理]