检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:曹正凯 张霞[2] 段爱军[1] CAO Zhengkai;ZHANG Xia;DUAN Aijun(State Key Laboratory of Heavy Oil Processing,China University of Petroleum,Beijing 102249,China;Dalian Research Institute of Petroleum and Petrochemicals,SINOPEC,Dalian 116045,Liaoning,China)
机构地区:[1]中国石油大学(北京)重质油国家重点实验室,北京102249 [2]中国石化大连石油化工研究院,辽宁大连116045
出 处:《化工进展》2021年第3期1449-1455,共7页Chemical Industry and Engineering Progress
基 金:国家自然科学基金(21878330,21676298,21808079)。
摘 要:采用原位合成法合成了不同硅铝原子比(Si/Al=50、40、30、20、10)的Al-FDU-12介孔材料,进一步浸渍镍钼活性金属制备了催化剂。通过小角X射线衍射(XRD)、广角XRD、N_(2)吸附-脱附、扫描电镜(SEM)、透射电镜(TEM)和紫外等表征手段对材料及催化剂做了相应的表征,并且考察了不同硅铝比的NiMo/Al-FDU-12催化剂在催化裂化柴油中的加氢脱硫脱氮性能。结果表明,FDU-12介孔材料孔径、孔容以及比表面积大,活性金属分散度高。铝改性后的NiMo/Al-FDU-12催化剂加氢脱硫、脱氮活性得到显著提高。当反应条件为温度350℃、氢油体积比600、压力5.0MPa、质量空速(WHSV)1.0h^(−1)、硅铝比20时,催化剂的加氢脱硫脱氮活性最高,脱硫率可达98.9%,脱氮率可达95.3%。在相同反应条件下,工业催化剂催化柴油加氢脱硫、脱氮率低于NiMo/AF-20以及NiMo/AF-10催化剂。因此,铝改性后的FDU-12材料具有良好的工业应用前景。Al-FDU-12 mesoporous materials with different silicon-to-aluminum atomic ratios(Si/Al=50,40,30,20 and 10)were synthesized by in-situ synthesis,and the catalysts NiMo/Al-FDU-12 were prepared by further impregnating nickel and molybdenum active metals.The Al-FDU-12 and catalysts were characterized by means of small-angle XRD,wide-angle XRD,N_(2)adsorption and desorption,SEM,TEM,UV and other characterization means.The hydrodesulfurization(HDS)performances of the NiMo/Al-FDU-12 with different Si and Al ratios were also evaluated.It showed that FDU-12 with high pore size,volume and surface area would lead to the high dispersion degree of active metals.The hydrodesulfurization and denitrification performances of NiMo/Al-FDU-12 catalyst were improved after Al modification.As the reaction conditions were:temperature of 350℃,hydrogen and oil volume ratio of 600,pressure of 5.0MPa,WHSV of 1.0h^(−1),Si and Al atomic ratio of 20,the catalyst showed the highest hydrodesulfurization and denitrification activity.The desulfurization and denitrification rate could reach 98.9%and 95.3%,respectively.Under similar reaction conditions,the industrial catalyst presented lower hydrodesulfurization and denitrification activity than the NiMo/AF-20 and NiMo/AF-10 catalysts.Therefore,the FDU-12 materials after Al modification possessed good prospect of industrial application.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.198