水泥球磨机调心滚子轴承接触应力和寿命分析  被引量:7

Analysis on Contact Stress and Life of Spherical Roller Bearings for Cement Ball Mill

在线阅读下载全文

作  者:贾磊 李云峰[1] JIA Lei;LI Yunfeng(School of Mechatronics Engineering,Henan University of Science and Technology,Luoyang 471039,China;School of Mechatronical Engineering,Shangqiu Institute of Technology,Shangqiu 476000,China)

机构地区:[1]河南科技大学机电工程学院,河南洛阳471039 [2]商丘工学院机械工程学院,河南商丘476000

出  处:《轴承》2021年第3期6-10,共5页Bearing

基  金:河南省科技攻关计划项目(182102210481)。

摘  要:介绍了球磨机小齿轮轴两端调心滚子轴承载荷的计算方法,建立Romax轴系仿真模型,分析了径向力、齿轮推力、温度对轴承接触应力和寿命的影响,结果表明:随径向力增大,轴承最大接触应力增大,寿命减小;随齿轮推力增大,游动端轴承的接触应力和寿命几乎无变化,固定端轴承列1和列2接触应力变化趋势不同,0~225 kN,列1呈减小趋势,列2呈增大趋势,超过225 kN后,列1略有增加,列2略有减小,固定端轴承寿命减小;随温度升高,轴承接触应力变化较小,在50℃内,轴承寿命基本保持不变,当温度继续升高,轴承寿命急剧下降。The calculation method is introduced for load of spherical roller bearings at both ends of pinion shaft of ball mill.The Romax shafting simulation model is established,and the influence of radial force,gear thrust and temperature on contact stress and life of the bearings is analyzed.The results show that:with the increase of radial force,the maximum contact stress increases,and the life decreases;with the increase of gear thrust,the contact stress and life of floating end bearings almost have no change,the variation trend of contact stress in row 1 and row 2 of fixed end bearings is different.From 0 to 225 kN,the contact stress of row 1 shows a decreasing trend,while the contact stress of row 2 shows an increasing trend.After exceeding 225 kN,the contact stress of row 1 slightly increases,and the contact stress of row 2 slightly decreases,the life of fixed end bearings is reduced;with the increase of temperature,the contact stress of the bearings changes little,the life of the bearings basically remains unchanged within 50℃,when the temperature continues to rise,the life of the bearings reduces sharply.

关 键 词:滚动轴承 调心滚子轴承 球磨机 接触应力 寿命 有限元分析 

分 类 号:TH133.33[机械工程—机械制造及自动化] TH117[机械工程—机械设计及理论]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象