基于CAESAR Ⅱ分析浆体泵出口在环境温度下的管道布置  

Study of the Piping Layout of Slurry Pump Outlet at the Ambient Temperature Based on CAESARⅡ

作　　者：付新民[1] 封志强 郝艳霞 FU Xin-min;FENG Zhi-qiang;HAO Yan-xia

机构地区：[1]中国恩菲工程技术有限公司,北京100038 [2]北京环都环保科技有限公司,北京100094

出　　处：《有色设备》2021年第1期28-31,共4页Nonferrous Metallurgical Equipment

摘　　要：浆体泵在配管时不同于普通流体泵,浆体泵需要考虑管内介质对管壁的磨蚀以及管道的防堵塞,故不能像普通流体泵一样通过增加弯头数量或者增加Π型弯的方式增加管道柔性,浆体泵的配管力求管道短且直。在该条件下,本文基于CAESAR II软件研究浆体泵在配管时通过合理的管道及支吊架布置,控制泵出口荷载在允许范围内,保证浆体泵的长期安全稳定运行。Slurry pumps are different from ordinary fluid pumps in piping arrangement.Slurry pumps need to consider the abrasion of the pipe wall by the service in the pipe and the anti-clogging of the pipe,so it cannot increase the pipe flexibility by increasing the number of elbows or theΠ-shaped like ordinary fluid pump.The piping of the slurry pump should be short and straight.Under this condition,this article is based on CAESAR II software to study the piping arrangement of slurry pump by setting reasonable supports or hangers.So that,the nozzle load of the pump is within its allowable range,ensuring the long-term safety and stability of the slurry pump running.

关 键 词：浆体泵 矿浆 管道 CAESARⅡ 

分 类 号：TD40[矿业工程—矿山机电]