检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张婷[1] 陈素明[1] 刘焕文[1] ZHANG Ting;CHEN Suming;LIU Huanwen(Xi'an Aircraft Industry(Group)Co.,Ltd.,Xi'an,Shaanxi Province,710089 China)
机构地区:[1]西安飞机工业(集团)有限责任公司,陕西西安710089
出 处:《科技创新导报》2020年第36期91-93,共3页Science and Technology Innovation Herald
摘 要:本文通过探讨激光选区熔化的成形原理及应用现状,从TC4成形工艺、成形组织、力学性能、质量等级等方面,将激光选区熔化TC4制件与传统锻铸件间的区别进行了简单分析。结果表明,相较于传统锻件、铸件而言,激光选区熔化制件材料利用率更高,制造周期更短;静态力学性能高于钛合金铸件性能,达到甚至超过锻件性能;激光选区熔化制件质量级别处于中等,比锻件质量级别低,但高于铸件质量级别。By discussing the forming principle and application status of laser selective melting,the difference between laser selective melting TC4 parts and traditional forging castings is briefly analyzed from the aspects of TC4 forming process,forming structure,mechanical properties and quality grade.The results show that,compared with traditional forgings and castings,the material utilization rate of laser selective melting parts is higher and the manufacturing cycle is shorter;the static mechanical properties are higher than the performance of titanium alloy castings,reaching or even exceeding the performance of forging parts;laser selective melting parts The quality level is medium,lower than the forging quality level,but higher than the casting quality level.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200