变压器有载分接开关的振动信号特征识别和状态评估技术研究  

Research on the vibration signal characteristic identification and state evaluation technology for the on-load tap changer of transformer

作　　者：张杰[1,2] 程林 谭丹[3] 程晨 张静[1,2] 黄勤清[1,2] Zhang Jie;Cheng Lin;Tan Dan;Cheng Chen;Zhang Jing;Huang Qinqing(Wuhan Nari Co.,Ltd.,State Grid Electric Power Research Institute,Wuhan 430074,China;Nari Group Co.,Ltd.,Nanjing 211000,China;Huazhong University of Science and Technology,Wuhan 430074,China)

机构地区：[1]国网电力科学研究院武汉南瑞有限责任公司,武汉430074 [2]南瑞集团有限公司,南京211000 [3]华中科技大学,武汉430074

出　　处：《电测与仪表》2021年第4期52-59,共8页Electrical Measurement & Instrumentation

基　　金：国家电网有限公司总部科技项目(524625190027)。

摘　　要：随着有载分接开关故障不断增加,传统的检修方式已经不能满足基本要求,故文章从声学振动角度对变压器有载分接开关振动信号进行了研究。基于独立成分分析法的信号预处理技术,通过定义相空间分布系数,对不同故障状态下的有载分接开关振动信号进行了识别;基于模糊集理论的多参数诊断技术,通过建立不同故障状态下的二维正态隶属度函数,对有载分接开关进行了状态评估。该技术的提出可以提高有载分接开关检修效率,对保障电力系统安全可靠运行具有重要意义。With the increasing faults of the on-load tap changer is increasing,the traditional maintenance method cannot meet its basic requirements.Therefore,this paper studies the vibration signal of the on-load tap changer of transformer from the acoustic vibration angle.Based on the signal preprocessing technology of independent component analysis,the vibration signals of on-load tap changers under different fault states are identified by defining the phase points distribution coefficient(PPDC).Based on the multi-parameter diagnosis technology of fuzzy set theory,the state of on-load tap changers is evaluated by establishing two-dimensional normal membership function under different fault states.The proposed technology can improve the efficiency of on-load tap changers maintenance,and is of great significance to ensure the safe and reliable operation of power systems.

关 键 词：有载分接开关 独立成分分析 相空间分布系数 正态隶属度函数 状态评估 

分 类 号：TM93[电气工程—电力电子与电力传动]