检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张玲玲 金莹 王蒙蒙 Zhang Lingling;Jin Ying;Wang Mengmeng(Zhejiang Metallurgical Research Institute Co.,Ltd.,Hangzhou 310030,China;Zhejiang Asia General Soldering&Brazing Material Co.,Ltd.,Hangzhou 310030,China;Zhejiang Key Laboratory of Brazing Materials and Technology,Hangzhou 310030,China)
机构地区:[1]浙江省冶金研究院有限公司 [2]浙江亚通焊材有限公司 [3]浙江省钎焊材料与技术重点实验室,杭州310030
出 处:《分析仪器》2021年第2期134-136,共3页Analytical Instrumentation
基 金:浙江省重点研发计划(2019C01089)。
摘 要:采用硝酸和稀硫酸溶解样品,选择Ti 323.966 nm为分析谱线,建立了电感耦合等离子体发射光谱法(ICP-OES)测定银铜钛合金中钛含量的分析方法。实验结果表明,钛的质量浓度在0~80μg/mL范围内与发射强度呈线性相关,校准曲线的线性回归方程为y=83.132 x+21.113,相关系数r=0.999973。该方法中钛的检出限为0.071μg/mL。本实验方法用于银铜钛合金中钛含量的分析,检测结果的相对标准偏差RSD﹤1%(n=10),加标回收率大于99%。与传统化学分析方法进行比对,测定结果一致。The samples were dissolved by nitric acid and dilute sulfuric acid,and Ti 323.966 nm was selected as the analytical spectral line.The experimental results showed that there was a linear correlation between the emission intensity and the mass concentration of titanium in the range of 0—80μg/mL,the linear regression equation of the calibration curve was y=83.132x+21.113,and the correlation coefficient was 0.999973.The detection limit of titanium was 0.071μg/mL.The relative standard deviation(RSD)was less than 1%(n=10),and the recovery was more than 99%.Compared with the traditional chemical analysis method,the determination results of the two methods were consistent.
关 键 词:湿法消解 电感耦合等离子体发射光谱法 银铜钛合金 钛
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38