TA3有限接触动态加压接骨板断口分析与失效机制  被引量:1

Fracture Analysis and Failure Mechanism of TA3 Limited Contact-Dynamic Compression Plates

在线阅读下载全文

作  者:郑靖[1] 饶少凯 周均 杨丹[1] 沈黎新 黄书浩 ZHENG Jing;RAO Shaokai;ZHOU Jun;YANG Dan;SHEN Lixin;HUANG Shuhao(Key Laboratory of Advanced Technologies of Materials,Ministry of Education,Southwest Jiaotong University,Chengdu 610031,China;Zhejiang Institute of Medical Device Supervision and Testing,Hangzhou 310018,China)

机构地区:[1]西南交通大学材料先进技术教育部重点实验室,四川成都610031 [2]浙江省医疗器械检验研究院,浙江杭州310018

出  处:《西南交通大学学报》2021年第2期411-419,共9页Journal of Southwest Jiaotong University

基  金:国家自然科学基金(51535010);浙江省省属科研院所扶持专项(2017F10029)。

摘  要:为探究TA3纯钛有限接触动态加压接骨板(LC-DCP)在人体内服役期间发生断裂的失效机制,采用化学成分分析仪、维氏硬度仪、光学显微镜和扫描电镜(SEM)等手段,对7个临床断裂失效的TA3纯钛LC-DCP样品进行了断口形貌分析;建立了TA3纯钛LC-DCP固定股骨干中段横形骨折的三维有限元模型,并采用ANSYS对该模型进行了受力分析.研究结果表明:7个TA3纯钛LC-DCP样品的材料符合要求,断口均位于接骨板中段螺钉孔处;断口表面均出现疲劳辉纹和二次裂纹,裂纹源区、扩展区和瞬时断裂区的元素组成相同;骨折患者在愈合前下地行走会导致接骨板的最大剪切应力大于TA3材料的屈服强度极限,且最大剪切应力发生在接骨板中段螺钉孔处;TA3纯钛LC-DCP的临床断裂失效主要源于骨折患者在愈合前下地行走导致过载,使得接骨板中段螺钉孔处萌生裂纹,随后承受循环疲劳载荷,最终断裂失效.To investigate the fracture mechanism of TA3 pure titanium limited contact-dynamic compression plates(LC-DCP)during service in the body.7 clinically fractured TA3 pure titanium LC-DCP were collected and sterilized,and their fracture surfaces were examined using chemical composition analyzer,Vickers hardness tester,optical microscope,and scanning electron microscope.A three-dimensional finite element model of middle femoral transverse fracture treated by TA3 pure titanium LC-DCP was established,and then the fracture healing and bone plate stress were analyzed using ANSYS software.The results show that the physical and chemical properties of the 7 LC-DCP are qualified,fracture occurs around the middle screw hole on the bone plates.Fatigue striations and secondary cracks appear on the fracture surface,and the regions of crack initiation,propagation and transient fracture,have same elemental compositions.For the patients walking prematurely,the maximum shear stress of bone plates occurs at the middle screw hole and it exceeds the yield strength of TA3 pure titanium.In sum,the fracture failure of the TA3 pure titanium LC-DCP in body is mainly resulted from patients walking prematurely,at the condition,cracks are initiated at the middle screw hole on the bone plate surface,and fatigue fracture occurs under the action of complex cyclic loading.

关 键 词:接骨板 断口分析 有限元分析 疲劳裂纹 失效分析 

分 类 号:V221.3[航空宇航科学与技术—飞行器设计]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象