检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:周红梅[1] 彭昱翔 陈竞 黄歆彧 ZHOU Hongmei;PENG Yuxiang;CHEN Jing;HUANG Xinyu(School of Civil Engineering and Architecture,Guangxi University of Science and Technology,Liuzhou 545006,China;Liuzhou OVM Structure Testing Technology Co.Ltd.,Liuzhou 545005,China)
机构地区:[1]广西科技大学土木建筑工程学院,广西柳州545006 [2]柳州欧维姆结构检测技术有限公司,广西柳州545005
出 处:《广西科技大学学报》2021年第2期20-25,共6页Journal of Guangxi University of Science and Technology
基 金:广西自然科学基金项目(2018GXNSFAA281284)资助.
摘 要:通过改变常温养护型超高性能混凝土(UHPC)中羟丙基甲基纤维素醚(HPMC)的掺量,研究了纤维素醚对UHPC流动度、凝结时间、抗压强度、抗折强度、轴心抗拉强度和极限拉伸值的影响,并对其结果进行了分析.试验结果表明:掺加不超过1.00%的低粘度HPMC不影响UHPC的流动度,但减小流动度经时损失,并延长凝结时间,大大提高施工性能;掺量低于0.50%时,对抗压强度、抗折强度、轴心抗拉强度的影响均不大,而一旦掺量大于0.50%,则其力学性能降低1/3以上.综合各项性能考虑,推荐HPMC掺量为0.50%.By changing the content of hydroxypropyl methyl cellulose ether(HPMC)in room temperature curing ultra-high performance concrete(UHPC),the effects of cellulose ether on the fluidity,setting time,compressive strength,flexural strength,axial tensile strength and ultimate tensile value of UHPC were studied.And the results were analyzed.The test results show that the addition of low viscosity HPMC with less than 1.00%does not affect the fluidity of UHPC,but reduces the time-lapse loss of fluidity,prolongs the setting time,and greatly improves the construction performance;when the content is less than 0.50%,the impact on the compressive strength,flexural strength and axial tensile strength is not great,but once the content is greater than 0.50%,the mechanical properties of UHPC will be reduced by more than 1/3 times.Considering the properties,the HPMC content of 0.50%is recommended.
关 键 词:超高性能混凝土 纤维素醚 常温养护 抗压强度 抗折强度 抗拉强度
分 类 号:TU528.58[建筑科学—建筑技术科学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.15.198.191