基于SOLIDWORKS与ADAMS的自动贴标机构仿真及优化设计  

Simulation analysis of automatic labeling mechanism based on SOLIDWORKS and ADAMS

作　　者：陆武慧 赵哲[2] LU Wuhui;ZHAO Zhe(School of General Aviation,Xi’an Aeronautical Polytechnic Institute,Xi’an 710089,China;College of Mechanical&Electrical Engineering,Shaanxi University of Science&Technology,Xi’an 710021,China)

机构地区：[1]西安航空职业技术学院通用航空学院,陕西西安710089 [2]陕西科技大学机电工程学院,陕西西安710021

出　　处：《电子设计工程》2021年第7期36-39,44,共5页Electronic Design Engineering

摘　　要：贴标机构是自动包装机械中关键的一部分,通过分析五杆贴标机构的运动特性,在SOLIDWORKS软件中,建立贴标机构的三维模型,将其导入到ADAMS软件中进行贴标过程的计算,并对贴标机构中曲柄长度进行参数化设计,对仿真结果进行了分析。结果表明:该五杆机构在贴标过程中,无运动干涉现象,模型准确,可应用于实际中,并探索了曲柄长度对贴标性能的影响。研究结果为后续的优化设计、有限元分析以及实际的物理样机生产提供了依据。The labeling mechanism is a key part of the automatic packaging machinery.By analyzing the motion characteristics of the five⁃bar labeling mechanism,a three⁃dimensional model of the labeling mechanism is established in the SOLIDWORKS software and imported into the ADAMS software for calculation of the labeling process,at the same time,crank length in labeling mechanism is parameterized design and simulation results are analyzed.The results show that the five⁃bar mechanism has no motion interference during the labeling process,and the model is accurate,which can be used in practice.The effect of crank length on labeling performance is also explored.The research results provide a basis for the subsequent optimization design,finite element analysis and actual physical prototype production.

关 键 词：贴标 机构 仿真 ADAMS 

分 类 号：TP29[自动化与计算机技术—检测技术与自动化装置]