PHG选择性汽油加氢装置辛烷值损失原因分析  

Analysis of octane number loss in PHG selective gasoline hydrogenation unit

作　　者：陈晓华 冯连坤 任文林 Chen Xiaohua;Feng Liankun;Ren Wenlin(PetroChina Lanzhou Petrochemical Company,Lanzhou,Gansu 730060;PetroChina Yunnan Petrochemical Company,Kunming,Yunnan 650399)

机构地区：[1]中国石油兰州石化分公司,甘肃省兰州市730060 [2]中石油云南石化有限公司,云南省昆明市650399

出　　处：《炼油技术与工程》2021年第4期14-17,21,共5页Petroleum Refinery Engineering

摘　　要：考察了中石油云南石化有限公司PHG选择性汽油加氢装置操作条件对混合汽油辛烷值的影响。结果表明:汽油辛烷值损失的影响因素有预加氢单元操作条件、轻汽油采出量和加氢脱硫反应器入口温度。根据以上影响因素,结合实际生产情况进行优化得出,预加氢反应器最低入口温度为136℃,分馏塔最小回流比为0.50,轻汽油最大采出比例为0.37,加氢脱硫反应器最低入口温度为215℃。优化后,辛烷值损失从优化前的1.3单位降低至0.6单位,达到了降低辛烷值损失的目的。The influence of operating conditions on octane number of blended gasoline in PHG selective gasoline hydrogenation unit of PetroChina Yunnan Petrochemical Company was investigated.The results showed that the influence factors of gasoline octane number loss were pre-hydrogenation unit operation conditions,light gasoline production and hydrodesulfurization reactor inlet temperature.According to the above factors and the actual production situation,the minimum inlet temperature of pre-hydrogenation reactor was 136℃,the minimum reflux ratio of fractionator was 0.50,the maximum output ratio of light gasoline was 0.37,and the minimum inlet temperature of hydrodesulfurization reactor was 215℃.After optimization,the loss of octane number was reduced from 1.3 unit to 0.6 unit,which achieved the purpose of reducing the loss of octane number.

关 键 词：PHG 选择性汽油加氢装置 辛烷值损失 预加氢反应器 加氢脱硫反应器 

分 类 号：TE624[石油与天然气工程—油气加工工程]