检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:佛新岗[1] FO Xingang(Xian Aeronautical Vocation and Technical College,Xian 710089,China)
出 处:《工业加热》2021年第4期39-43,共5页Industrial Heating
基 金:陕西省教育厅科研计划项目(17JK0402);西安航空职业技术学院2017年度科研计划项目(17XHZH-016)。
摘 要:针对大多数CAM软件没有标准的数控车床后处理现状,基于UG/Post Builder软件平台,结合TCL语言开发了符合FANUC0i数控系统的标准后处理程序,转换获得的NC程序经过宇龙数控仿真软件验证,无语法结构错误等问题。实践表明:开发的专用后处理程序,可以输出标准的NC程序,无需手工修改,可以直接用于加工,提高了编程效率和质量。Aiming at the present situation of NC lathe post-processing that most CAM software have no standard,the standard post-processing program of FANUC 0 i NC system was developed based on UG/Post Builder software platform and TCL language.The NC program obtained by conversion was verified by Yulong NC simulation software,and there were no grammatical structure errors.The practice shows that the developed special post-processing program can output standard NC program without manual modification and can be directly used for machining,which improves the programming efficiency and quality.
关 键 词:UG/Post Builder TCL 后处理 宇龙数控仿真软件
分 类 号:TH164[机械工程—机械制造及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229