QT600材料表面离子镀AlCrN涂层的耐磨性能研究  

Surface Modification of QT600 Rotor with Multi ArcIon Plated AlCrN Coatings

作　　者：耿浩然 赵毅红[1] 周晓进 余晶晶 龚孜宇 王自力 何玉龙 陈荣发[1] 李子亮 GENG Haoran;ZHAO Yihong;ZHOU Xiaojin;YU Jingjing;GONG Ziyu;WANG Zili;HE Yulong;CHEN Rongfa;LI Ziliang(School of Mechanical Engineering,Yangzhou University,Yangzhou 225127 China;Yangzhou Panfeng Network Technology Co.,Ltd.,Yangzhou 225000,China;Shanghai Hanzhong Fine Machinery Co.,Ltd.,Shanghai 201501,China)

机构地区：[1]扬州大学机械工程学院,扬州225127 [2]扬州攀峰网络科技有限公司,扬州225000 [3]上海汉中精机股份有限公司,上海201501

出　　处：《真空科学与技术学报》2021年第3期253-259,共7页Chinese Journal of Vacuum Science and Technology

基　　金：2019年扬州市级计划-市校合作专项(YZ2019129);2019年度扬州高新区创享高新创新人才项目;扬州市邗江区面上竞争性项目(HJM2019006)。

摘　　要：采用多弧离子镀膜的方法在空压机转子QT600表面制备AlCrN涂层,详细研究干滑动摩擦条件下,不同载荷对涂层和基体的滑动摩擦学特性。研究结果表明:转子基体的磨损形式主要为黏着与磨粒磨损,载荷越高,磨粒磨损越严重;AlCrN涂层在2N载荷下的磨损形式主要为黏着磨损,在8N载荷下主要为黏着与磨粒磨损。The surfaces of QT600 rotor, of an air compressor, were modified and reconditioned with AlCrN coatings synthesized by multi arc ion plating.The influence of the AlCrN coatings on the microstructures, phases and tribological properties, including the hardness, wear resistance and friction coefficient, was investigated with X-ray diffraction, scanning electron microscopy and conventional mechanical probes.The results show that the AlCrN coatings, mainly comprising AlCrN,CrN,AlN phased grains and deposited under the optimized conditions significantly improved the tribological behavior of QT600 rotor surface, especially the friction coefficient and wear resistance.The adhesive wear, at a load of 2 N and abrasive wear, at a load of 8 N,were found to account for the wear mechanisms, respectively.

关 键 词：空压机转子 多弧离子镀 AlCrN涂层 摩擦磨损性能 

分 类 号：TG174.444[金属学及工艺—金属表面处理]