子午线航空轮胎带束条挤出工艺技术研究  

Research on extrusion technology of belt strip for radial aerospace tire

作　　者：王超群 吴洪全 齐立平 常爱修 李德功 Wang Chaoqun;Wu Hongquan;Qi Liping;Chang Aixiu;Li Degong(Qingdao Double Star Tire Industry Co.LTD.,Qingdao 266400,Shandong,China)

机构地区：[1]青岛双星轮胎工业有限公司,山东青岛266400

出　　处：《橡塑技术与装备》2021年第9期1-6,共6页China Rubber/Plastics Technology and Equipment

摘　　要：为满足子午线航空轮胎高内压、高速度、高载荷、大变形、抗冲击的的使用条件,在覆胶胎体帘线和特制波纹保护层之间,采用缠绕带束条的方法形成环形网状结构作为胎体带束层。带束条采用挤出法生产,本文详细论述带束条挤出法生产及其工艺技术控制过程,为提高航空轮胎缠绕带束层质量,优化产品结构奠定良好的基础。In order to meet the use conditions of high internal pressure,high speed,high load,large deformation and impact resistance of radial aviation tires,the belt ring network structure is adopted as the carcass belt layer.The carcass belt layer is between the rubber-coated carcass cord and the special corrugated protective layer.This article discusses the production of belt strips and its technological control process,in detail which lays a good foundation for improving the quality of the winding belt of aviation tires and optimizing the product structure.

关 键 词：航空轮胎 带束条 挤出法 工艺过程控制 

分 类 号：TQ336.1[化学工程—橡胶工业]