注塑机舱门散热器后盖注射模设计  

Design of injection mould for radiator back cover of injection molding machine engine room door

作　　者：王华金[1] 封旭[2] 杨娟[3] WANG Hua-jin;FENG Xu;YANG Juan(Beihai Vocational College,Beihai,Guangxi 536009,China;Liuzhou City Vocational Col-lege,Liuzhou,Guangxi 545036,China;Baise Vocational College,Baise,Guangxi 533000,China)

机构地区：[1]北海职业学院,广西北海536009 [2]柳州城市职业学院,广西柳州545036 [3]百色职业学院,广西百色533000

出　　处：《模具工业》2021年第5期56-59,共4页Die & Mould Industry

基　　金：北海职业学院2019年度科研课题项目(2019YKZ02);广西高校教师基础能力提升课题项目(2019KY1432)。

摘　　要：针对注塑机舱门散热器后盖的注射成型,设计了双浇口两板式热流道注射模,浇注系统采用热流道+普通流道进行熔融塑料的输送,使用潜伏式浇口提高熔体流动前沿温度,解决了型腔中格栅充填困难的问题,脱模机构采用简化型斜导柱驱动侧滑块对侧孔实施抽芯脱模,模具中采用二次推出结构解决了塑件深筋位及螺钉柱脱模困难的问题。实践证明:模具结构简单实用,动作可靠,可为同类塑件的注射成型提供参考。Combined with the injection moulding for radiator back cover of injection molding machine engine room door,a two-plate mould with double gates and hot runner was designed.The gating system used the hot runner+cold runner,and a submarine gate was used to improve the front flow temperature,which solved the problem that difficult filling of the plastic grid in the mould cavity.In the design of the demoulding mechanism,a simplified inclined guide pillar was used to drive the side slide block to demould the side hole of the plastic part.By adopting the twice ejection system,the difficulty demoulding problem for the deep rib position and the bolt was solved.Practices proved that the mould structure was simple,and it ran reliable.

关 键 词：注射模 热流道 散热器后盖 二次推出 浇注系统 

分 类 号：TG76[金属学及工艺—刀具与模具] TQ320.662[化学工程—合成树脂塑料工业]