检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:连鸣[1,2] 周玉浩 韩文凯 LIAN Ming;ZHOU Yuhao;HAN Wenkai(School of Civil Engineering,Ministry of Education,Xi'an University of Architecture and Technology,Xi'an 710055,P.R.China;Key Lab of Structural Engineering and Earthquake Resistance,Ministry of Education,Xi'an University of Architecture and Technology,Xi'an 710055,P.R.China;China Architecture Design&Research Institute,Beijing 100044,P.R.China)
机构地区:[1]西安建筑科技大学土木工程学院,西安710055 [2]西安建筑科技大学结构工程与抗震教育部重点实验室,西安710055 [3]中国建筑设计研究院,北京100044
出 处:《土木与环境工程学报(中英文)》2021年第3期24-36,共13页Journal of Civil and Environmental Engineering
基 金:国家自然科学基金(51708444)。
摘 要:为了研究带可更换剪切型耗能梁段的高强钢框筒结构(HSS-FTS-RSL)的抗震性能,设计了2∶3缩尺子结构试验试件,对其进行低周往复加载,研究其破坏模式、滞回性能及耗能梁段的可更换能力。基于OpenSees建立了HSS-FTS-RSL结构的简化数值分析模型,数值分析结果与试验结果吻合良好。建立了3种不同耗能梁段布置方式的HSS-FTS-RSL整体结构简化数值模型,对其进行非线性时程分析。结果表明:HSS-FTS-RSL子结构试件具有良好的抗震性能,在循环荷载下表现为耗能梁段的破坏;更换耗能梁段不会影响结构的抗震性能;结构在地震作用下的变形满足规范限制要求;在构件截面尺寸相同,即相同用钢量的前提下,采用高强钢可以有效降低构件的应力水平;耗能梁段最大可更换残余层间侧移角为0.41%,且在大震后整体结构残余层间侧移角为0.028%~0.148%,可以实现耗能梁段的更换;基于不同耗能梁段布置方式的HSS-FTS-RSL分析结果,建议HSS-FTS-RSL结构耗能梁段采用三跨间隔布置。High-strength steel fabricated framed-tube structure with replaceable shear link(HSS-FTS-RSL)was proposed.One 2/3 scaled sub-structure specimen of HSS-FTS-RSL was fabricated.Low cycle reciprocating loading test was carried out for the specimen to study its seismic performance,including failure modes,hysteretic behaviors,and replaceability.The simplified numerical model of HSS-FTS-RSL was established by using OpenSees,and the analysis results of this model had good agreement with the test results.Three simplified numerical models of HSS-FTS-RSL with different layouts of shear links were considered to investigate their seismic performance through the nonlinear dynamic analysis.The results show that the specimen had good seismic performance,with the failure of energy dissipation beam section under cyclic loading.The maximum interstroy drifts could meet the demands in the seismic code under the ground motions.The high-strength steel could reduce the stress in spandrel beams and columns but not increased the amount of steel of the structures.The maximum residual story drifts ranged from 0.028%to 0.148%,which were lower than the maximum residual story drift of 0.41%for replacing shear links obtained from the test.Considering the seismic performance and repairability of the structure,it was suggested that the shear links of HSS-FTS-RSL should be arranged in three-span interval according to the analysis results.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.198