滑移面几何特征对高速转杯成纱效能影响研究  

A study of the high-speed spinning rotor’s yarn-forming efficiency under the influence of its geometrical features on slip plane

作　　者：邱海飞[1] QIU Haifei(College of Mechanical Engineering,Xijing University,Xi’an 710123,China)

机构地区：[1]西京学院机械工程学院,西安710123

出　　处：《丝绸》2021年第5期41-46,共6页Journal of Silk

基　　金：陕西省教育厅科研计划项目(15JK2177);西京学院高层次人才专项基金资助项目(XJ20B09);西京学院横向课题资助项目(2019610002001915)。

摘　　要：为改进转杯纺的工艺性能和成纱效率,根据转杯国家标准及其结构特征,针对抽气式转杯开发了APDL参数化设计程序。文章在优化数学模型构建和有限元分析基础之上,采用零阶方法实现了转杯机械力学性能动态优化。结果显示:当滑移面角度α为18.13°、长度L为17.98 mm时,转杯基频f1逼近值达到最大(7425 Hz),相对于初始基频提高了约8.1%,使转杯结构抗振性能得到有效提升;静力学性能方面,优化后的杯体Von Mises等效应力最大值减小了63 MPa,最大静力位移减小了0.101 mm,有效增强了抽气式转杯的疲劳强度和静力刚度。为超高速转杯的动态设计与结构优化提供了技术思路,对于新型高速转杯纺纱机的设计研发具有一定参考价值。To improve the rotor-spinning process performance and yarn-forming efficiency,a APDL parametric design program for aspirated rotor was developed in accordance with national standard and rotor structural features.Through optimized mathematical model building and finite element analysis,dynamic optimization of the rotor mechanical properties was implemented using zero-order method.The results showed that when the angle of slip plane α was 18.13° and the length L was 17.98 mm,the approximate value of fundamental frequency f1 for the rotor reached maximum(7425 Hz),about 8.1% higher than the initial frequency,which effectively improved the vibration resistance of the rotor.In terms of the static performance,maximum value of Von Mises equivalent stress on the rotor was reduced by 63 MPa and the maximum static displacement on the rotor was also reduced by 0.101 mm,which effectively strengthened the fatigue strength and static stiffness of the rotor.This paper provides some technical ideas for the dynamic design and structural optimization of ultra-high-speed rotor and has important reference value for the design and development of new-type high-speed rotor spinning machine.

关 键 词：滑移面 转杯纺 高速 参数化 自由端纺纱 有限元仿真 

分 类 号：TS104.71[轻工技术与工程—纺织工程]