进给系统爬行对沟道磨床精度的影响研究  

Effect of crawling phenomenon in feed system on the accuracy of channel grinder

作　　者：梁兵兵 王勇[1] 赵小勇[1] 朱嘉敏 金平 周庆成 LIANG Bingbing;WANG Yong;ZHAO Xiaoyong;ZHU Jiamin;JIN Ping;ZHOU Qingcheng(School of Mechanical Engineering, Hefei University of Technology, Hefei 230009, China;Anhui LECN Mechanical Equipment Co., Ltd., Chizhou 247100, China)

机构地区：[1]合肥工业大学机械工程学院,安徽合肥230009 [2]安徽力成机械装备有限公司,安徽池州247100

出　　处：《合肥工业大学学报（自然科学版）》2021年第5期602-606,共5页Journal of Hefei University of Technology：Natural Science

基　　金：安徽省重大科技专项资助项目(16030901018)。

摘　　要：文章以QMB125球笼沟道磨床的伺服进给系统为研究对象,建立了伺服进给系统的数学模型,分析了进给系统产生爬行的机理;通过大量的运动学仿真,获得了进给速度,工作台质量,系统阻尼,系统刚度及静、动摩擦因数之差等参数对进给系统爬行的影响规律;在仿真基础上对各影响因素进行了正交试验分析,得到了各因素之间的耦合关系;依据正交试验分析结果,给出抑制爬行提高磨床精度的最优水平组合。Based on the servo feed system of the QMB125 cage gauge,this paper establishes the mathematical model of the servo feed system,and analyzes the mechanism of the feed system to generate crawling.Through a large number of kinematics simulations,the influence of the feeding speed,the quality of the system,the system damping,the system stiffness,and the difference between static and kinetic friction coefficient on the crawling phenomenon in the feed system is studied.The orthogonal test analysis on the influencing factors is carried out,and the coupling relationship between various factors is obtained.The optimal combination for suppressing the crawling and improving the accuracy of the grinding machine is given according to the results of orthogonal test analysis.

关 键 词：进给系统 沟道磨床 爬行 磨床精度 正交试验 

分 类 号：TH132.1[机械工程—机械制造及自动化]