直流电抗器与电容型限流器多目标优化配置方法  

Multi-objective Optimal Configuration Method for DC Reactor and Capacitive Current Limiter

作　　者：蒋纯冰 赵成勇 JIANG Chunbing;ZHAO Chengyong(State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources(North China Electric Power University),Beijing 102206,China)

机构地区：[1]新能源电力系统国家重点实验室(华北电力大学),北京市102206

出　　处：《电力系统自动化》2021年第10期149-156,共8页Automation of Electric Power Systems

基　　金：国家重点研发计划资助项目(2018YFB0904604)。

摘　　要：直流电网中直流故障电流抑制是亟须解决的关键问题之一。为了抑制故障电流的上升速率与峰值,针对含有电容型限流器的直流断路器,综合考虑电感和电容的故障电流抑制效果,分析了投入电容型故障限流器前后的故障电流特性,提出了在满足直流断路器开断容量限制和换流器桥臂电力电子器件电流限制的约束条件下直流电抗器和电容型限流器的优化配置方案。在PSCAD/EMTDC中搭建了六端直流电网模型,以直流电抗器电感值、限流电容两端电压和直流断路器分断电流作为多目标函数,对直流电抗器和电容型限流器进行参数优化,并给出针对不同电气应用场景的直流电抗器和电容型限流器优化配置方案。The suppression of direct current(DC) fault current in the DC power grid is one of the key problems to be solved urgently. In order to suppress the rising rate and the peak value of fault current, this paper comprehensively considers the effect of inductors and capacitors on fault current suppression in the DC circuit breaker(DCCB) with the capacitive current limiter. And the fault current characteristics before and after the throw-in of capacitive current limiter are analyzed. Then this paper proposes the optimal configuration scheme of the DC reactor and the capacitor current limiter under the constraint conditions of the breaking capacity limit of DCCB and the current limit of power electronic devices on the arm of the converter. Finally, a six-terminal DC power grid model is built in the PSCAD/EMTDC, and the parameters of DC reactor and capacitive current limiter are optimized with the multi-objective function of the inductances of DC reactors, the voltage across capacitive current limiters and the breaking current of DCCB. The optimal configuration schemes of the DC reactor and the capacitive current limiter are provided for different electrical application scenarios.

关 键 词：直流电网 模块化多电平换流器 直流断路器 直流电抗器 电容型限流器 优化配置 

分 类 号：TM721.1[电气工程—电力系统及自动化] TM47