FBMC/OQAM系统中无边带信息的色散选择性映射方法  

DSLM method without side information in FBMC/OQAM systems

作　　者：李磊[1] 薛伦生[1] 陈西宏[1] 袁迪喆 LI Lei;XUE Lunsheng;CHEN Xihong;YUAN Dizhe(Air and Missile Defense College,Air Force Engineering University,Xi’an 710051,China)

机构地区：[1]空军工程大学防空反导学院,陕西西安710051

出　　处：《系统工程与电子技术》2021年第6期1699-1705,共7页Systems Engineering and Electronics

基　　金：国家自然科学基金(61671468)资助课题。

摘　　要：色散选择性映射(dispersive selected mapping,DSLM)是降低基于偏移正交幅度调制的滤波器组多载波(filter bank multicarrier with offset quadrature amplitude modulation,FBMC/OQAM)系统峰均比(peak to average power ratio,PAPR)的技术,但是该方法需要传输额外比特边带信息(side information,SI)。为了抑制FBMC/OQAM系统的PAPR,提高系统的频谱利用率,在DSLM的基础上,提出了一种无边带信息的色散选择性映射(without side information of DSLM,W-DSLM)方法。W-DSLM通过在相位序列中挑选特定的位置,并插入模值大于1的扩展因子对相位序列进行改进,然后利用扩展因子与相邻位置的能量差,在接收端得到最优相位序列,从而恢复出传输的符号。扩展因子的插入避免了边带信息的传输,因此能够有效提高系统的频谱效率。仿真结果验证了该方法的有效性。Dispersive selected mapping(DSLM)is a technique to reduce peak-to-average power ratio(PAPR)of the system of filter bank multicarrier with offset quadrature amplitude modulation(FBMC/OQAM),but this method requires the transmission of additional bitside information(SI).In order to suppress the PAPR of the FBMC/OQAM system and improve the spectrum utilization rate of the system,on the basis of the DSLM,a method without side information for the selective mapping(W-DSLM)is proposed.W-DSLM improves the phase sequence by selecting a specific position in the phase sequence and insert an expansion factor with a modulus greater than one.Then,using the energy difference between the expansion factor and the adjacent position to obtain the optimal phase sequence at the receiver,thus the transmitted symbol is recovered.The insertion of the expansion factor avoids the transmission of sideband information,which can effectively improve the spectrum efficiency of the system.Simulation results verify the effectiveness of this method.

关 键 词：滤波器组多载波 偏移正交幅度调制 峰均比 色散选择性映射 无边带信息 

分 类 号：TN911[电子电信—通信与信息系统]