G115和T92钢表面FeAl渗层制备及其抗高温水蒸汽氧化性能  

Preparation of FeAl penetration layer on G115 and T92 steel surface and its oxidation resistance to high temperature steam

作　　者：董猛 谢逍原 朱阳存 杨淑莉 刘光明[3] 汪元奎 DONG Meng;XIE Xiao-yuan;ZHU Yang-cun;YANG Shu-li;LIU Guang-ming;WANG Yuan-kui(Dongfang Boiler group Co Ltd,Zigong 643001,China;Nanjing Aerosun Art Engineering Co Ltd,Nanjing 211200,China;School of Materials Science and Engineering,Nanchang Hangkong Universily,Nanchang 330063,China)

机构地区：[1]东方电气集团东方锅炉股份有限公司,四川自贡643001 [2]南京晨光艺术工程有限公司,江苏南京211200 [3]南昌航空大学材料科学与工程学院,江西南昌330063

出　　处：《材料热处理学报》2021年第5期135-142,共8页Transactions of Materials and Heat Treatment

摘　　要：采用粉末包埋法对G115和T92钢表面进行低温渗铝,测试了两者渗铝前后在高温水蒸汽环境下的氧化行为。结果表明,在660℃水蒸汽环境下,G115钢的抗氧化性能优于T92钢;G115与T92钢表面制备的FeAl渗层具有优秀的抗高温水蒸汽氧化性能。同等实验条件下,渗铝试样的氧化增重比无渗层试样低两个数量级;G115钢中W、Cu等元素有利于渗层在高温水蒸汽中的稳定,可以有效地降低Al的扩散速率。Low temperature aluminizing of G115 and T92 steel surfaces was carried out by powder embedding method, and the oxidation behavior of G115 and T92 steel before and after aluminizing in high temperature steam environment was tested. The results show that the oxidation resistance of the G115 steel is better than that of the T92 steel in 660 ℃ steam environment, and the FeAl penetration layer prepared on the surface of the G115 and T92 steels has excellent oxidation resistance to high temperature steam. Under the same experimental conditions, the oxidation mass gain of the aluminized samples is two orders of magnitude lower than that of the samples without penetration layer. The W and Cu elements in the G115 steel are beneficial to the stability of the penetration layer in high temperature steam and can effectively reduce the diffusion rate of Al.

关 键 词：G115钢 T92钢 FeAl渗层 低温渗铝 高温氧化 

分 类 号：TG174.44[金属学及工艺—金属表面处理]