基于云计算的路由器盒盖半固态压铸工艺设计及优化  

Process Design and Optimization of Semi-solid Die-casting of Box Lid Based on Cloud Computing Router

作　　者：龙文元[1] 龚杰 宋国金 Long Wenyuan;Gong Jie;Song Guojin(School of Aeronautical Manufacturing Engineering,Nanchang Hangkong University;Xiamen Gnaire Technology Co.,Ltd.;General Institute of Mechanical Science and Research(Jiangle)Semi-solid Technology Research Co.,Ltd.)

机构地区：[1]南昌航空大学航空制造工程学院,南昌330063 [2]厦门格耐尔科技有限公司 [3]机械科学研究总院(将乐)半固态技术研究所有限公司

出　　处：《特种铸造及有色合金》2021年第5期638-640,共3页Special Casting & Nonferrous Alloys

基　　金：国家自然科学基金资助项目(51271091);江西省自然科学基金资助项目(20161BAB206107)。

摘　　要：对5G无线路由器盒盖的半固态压铸工艺和模具进行了设计,利用智铸超云CAE云平台对其半固态流变压铸充型过程进行了数值模拟,优选了压铸工艺方案进行生产试验。结果表明,利用云计算进行数值模拟能为工艺方案的评价和改进提供参考,能缩短新产品的开发周期。根据优化方案设计制造了路由器盒盖压铸模具,采用半固态压铸工艺生产出了合格的路由器盒盖压铸件,压铸件无缩松、气孔等缺陷。The semi-solid die-casting process and die of 5 G wireless router box cover were designed.The semi-solid rheological die-casting filling process was simulated by using the CAE cloud platform.An optimal die-casting process was selected for the production test.The results indicate that numerical simulation carried out by cloud computing can provide a scientific basis for the evaluation and improvement of process scheme,shortening the development cycle of new products.The die casting mould of router box cover was designed and manufactured according to the simulation and optimization process,and qualified die casting parts of router box cover without shrinkage and porosity were produced by using semi-solid die casting process.

关 键 词：路由器盒盖 云计算 工艺优化 

分 类 号：TP311[自动化与计算机技术—计算机软件与理论] TG249.26[自动化与计算机技术—计算机科学与技术]