PLA/PBS/山茶籽粉3D打印骨架对亚甲基蓝的吸附性能研究  

The adsorption behavior of 3D-printed PLA/PBS/Camellia seed powder scaffold for methylene blue

作　　者：郑荧炼 朱敏玉 肖荔人[2,3] 夏新曙[1,3,4] 曹长林 刘欣萍 钱庆荣[1,3,4] 陈庆华[1,3,4] ZHENG Yinglian;ZHU Minyu;XIAO Liren;XIA Xinshu;CAO Changlin;LIU Xinpin;QIAN Qingrong;CHEN Qinghua(College of Environmental Science and Engineering,Fujian Normal University,Fuzhou 350007,China;College of Chemistry and Materials,Fujian Normal University,Fuzhou 350007,China;Engineering Research Center of Polymer Green Recycling of Ministry of Education,Fujian Normal University,Fuzhou 350007,China;Fujian Key Laboratory of Pollution Control&Resource Reuse,Fuzhou 350007,China)

机构地区：[1]福建师范大学环境科学与工程学院,福建福州350007 [2]福建师范大学化学与材料学院,福建福州350007 [3]福建师范大学聚合物资源绿色循环利用教育部工程研究中心,福建福州350007 [4]福建省污染控制与资源循环利用重点实验室,福建福州350007

出　　处：《再生资源与循环经济》2021年第5期29-34,共6页Recyclable Resources and Circular Economy

基　　金：国家重点研发计划资助项目(2019YFC1908200);福建省科技资助项目(2018Y4002)。

摘　　要：通过熔融共混的方式制备了聚乳酸(PLA)/聚丁二酸丁二醇酯(PBS)/山茶籽粉(CSP)(ASP)3D打印线材,并采用FDM技术打印成ASP骨架用于吸附亚甲基蓝(MB)。ASP骨架对MB的吸附平衡时间为72 h,此时吸附率为89.89%。吸附过程遵循伪二级动力学模型,且可以用Langmuir等温吸附模型进行描述,是一个自发的放热过程。将农业废弃物与生物基3D打印材料结合,实现了农业废弃物的增值化利用,降低了生物基3D打印材料的成本,并实现了功能化应用。3D-printed filament of Polylactic acid(PLA)/poly(butylene succinate)(PBS)/Camellia seed powder(CSP)(ASP)was prepared by melting blends.The filament was then used for printing ASP scaffold via fused deposition modeling(FDM)for adsorbing methylene blue(MB).The equilibrium time of the adsorption is 72 h,and 89.89%removal ratio is obtained.Pseudo-second-order model is more suitable to describe the adsorption process,and which follows the Langmuir isotherm.The adsorption is determined to be an exothermic,spontaneous process.The combination of 3D printing and agricultural wastes is a good way to realize the valuation of agricultural wastes and the reduction of the cost of 3D printing material.Furthermore,the functional application of 3D printing is also achieved.

关 键 词：山茶籽粉 固定化 3D打印 吸附 

分 类 号：X712[环境科学与工程—环境工程]