检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王瑞博 戈延林 陈林根 吴志祥 WANG Ruibo;GE Yanlin;CHEN Lingen;WU Zhixiang(Institute of Thermal Science and Power Engineering,Wuhan Institute of Technology,Wuhan 430205,China;School of Mechanical&Electrical Engineering,Wuhan Institute of Technology,Wuhan 430205,China)
机构地区:[1]武汉工程大学热科学与动力工程研究所,武汉430205 [2]武汉工程大学机电工程学院,武汉430205
出 处:《热力透平》2021年第2期73-78,共6页Thermal Turbine
基 金:国家自然科学基金(51779262);武汉工程大学研究生教育创新基金项目(CX2020047)。
摘 要:应用有限时间热力学理论,建立了内可逆变温热源定常流Lenoir热机模型,导出了其功率P和热效率η。通过数值计算,得到了P和η与换热器的热导率分配u_(L)和工质与热源间的热容率匹配C_(wf1)/C_(H)之间的关系。结果表明:当高温侧换热器热导率U_(H)、低温侧换热器热导率u_(L)给定时,P-η为一个“点”;当u_(L)可优化时,P-u_(L)和η-u_(L)呈类抛物线型变化,即存在热导率分配最优值u L P(opt)、u L_(η(opt)),使循环达到最大功率点P_(max)和最大效率点ηmax;随着C_(wf1)/C_(H)的增大,P_(max)-C_(wf1)/C_(H)呈类抛物线型变化,即存在热容率匹配最优值C_(wf1)/C_(H)_(opt),使循环达到二次功率最大值(P_(max))_(max)。Applying finite-time thermodynamics theory,an endoreversible steady flow Lenoir cycle model with variable-temperature heat reservoirs is established,and the expressions of power P and thermal efficiencyηare derived.By numerical calculations,the characteristic relationship between P,ηand the heat conductance distribution u_(L)of the heat exchangers,and the relationship between P,ηand the thermal capacity rate matching C_(wf1)/C_(H)of working fluid and heat source are studied.The results show that when the heat conductances of the hot-side and cold-side heat exchangers U_(H),u_(L)are constant,P-ηis a certain"point".When u_(L)can be optimized,P-u_(L)andη-u_(L)show parabolic-like change,which means there exist optimal values of heat conductance distributions u_(L P(opt)),u L_(η(opt))to make the cycle reach the maximum power point P_(max)and the maximum efficiency pointηmax.With the increase of C_(wf1)/C_(H),P_(max)-C_(wf1)/C_(H)shows a parabolic-like change,which indicates there exists an optimal value of thermal capacity rate matching(C_(wf1)/C_(H))opt to make the cycle reach the double-maximum power point(P_(max))_(max).
关 键 词:有限时间热力学 内可逆定常流Lenoir循环 循环功率 热效率 热导率分配 热容率匹配
分 类 号:TK123[动力工程及工程热物理—工程热物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.62