紧凑型平板环路热管实验研究  

Experimental study on compact plate loop heat pipe

作　　者：田亚玲 张海南[1] 徐洪波[1] 田长青[1,2] TIAN Yaling;ZHANG Hainan;XU Hongbo;TIAN Changqing(Key Laboratory of Science and Technology on Space Energy Conversion,Technical Institute of Physics and Chemistry,Chinese Academy of Sciences,Beijing 100190,China;University of Chinese Academy of Sciences,Beijing 100049,China)

机构地区：[1]中国科学院空间功热转换技术重点实验室,中国科学院理化技术研究所,北京100190 [2]中国科学院大学,北京100049

出　　处：《化工学报》2021年第6期3288-3295,共8页CIESC Journal

基　　金：国家重点研发计划项目(2018YFE0111200);中国科学院天文台站设备更新及重大仪器设备运行专项经费。

摘　　要：环路热管因其紧凑、高效等优势在电子元件冷却方面十分具有应用前景。实验研究了一种紧凑型平板环路热管在不同工况下的启动特性和传热特性。结果显示部分低加热功率和充液率下的启动出现振荡,高加热功率和较高充液率有利于环路热管平稳启动。总结了温度振荡现象出现的工况范围。传热特性方面,存在一个最优充液率使热管散热性能最佳,这个最优充液率与散热负荷有关。低负荷时,最优充液率较低;高负荷时,最优充液率较高。Loop heat pipes(LHP)have great application prospects in the cooling of electronic elements duo to their compactness and high efficiency.This paper designed a compact LHP with capillary core flat-over evaporator and investigated its start-up and heat transfer performance under various conditions experimentally.The results show that a higher heating power and higher refrigerant charge are beneficial with the LHP starts up stably,while it happens oscillation during the start-up process with low heat load and charge ratio.As for the heat transfer performance,there is an optimal refrigerant filling ratio corresponding to the heat load where the LHP shows the best cooling performance.The optimal filling ratio is small when the heat load is relatively low,and the performance will be better if the refrigerant charge is relatively large under a condition with high heat load.

关 键 词：紧凑型 平板蒸发器 环路热管 传热 蒸发 多孔介质 

分 类 号：TK172.4[动力工程及工程热物理—热能工程]