基于激光三角法的砂轮磨损量检测  

Research on wear measurement of grinding wheel based on laser triangulation

作　　者：母德强[1] 郑金涛 司苏美 马松彪 赵世彧 刘金欣 姚松林 郝鹏飞 MU Deqiang;ZHENG Jintao;SI Sumei;MA Songbiao;ZHAO Shiyu;LIU Jinxin;YAO Songlin;HAO Pengfei(School of Mechatronic Engineering, Changchun University of Technology, Changchun 130012, China)

机构地区：[1]长春工业大学机电工程学院,吉林长春130012

出　　处：《长春工业大学学报》2021年第3期200-204,共5页Journal of Changchun University of Technology

基　　金：吉林省科技厅基金资助项目(20130206027GX)。

摘　　要：针对砂轮磨损量检测问题,提出一种基于激光三角法原理的砂轮磨损量检测方法,并搭建了一套实验检测系统。实验结果表明,该方法能够对磨床砂轮磨损量进行非接触检测,测量范围大,整周期测量时,其线性度小于0.6%。该方法操作简单,可应用于实际生产中。Aiming at the problem of detecting the wear of the grinding wheel,a method of detecting the wear of the grinding wheel based on the principle of laser triangulation is proposed,and a set of experimental detection system is built.Experiment results show that this method can be used to perform non-contact detection of the grinding wheel wear of the grinding machine,and the measurement range can be wide.During the whole cycle measurement,the condition of the grinding wheel surface wear can be relatively completely detected,and The linearity is less than 0.6%.The method is simple to operate and can be applied in actual production.

关 键 词：磨损量 检测 激光 砂轮 激光三角法 

分 类 号：TH161.11[机械工程—机械制造及自动化]