检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:许海亮 任合欢 宋义敏 贺志杰 朱晨利 XU Hailiang;REN Hehuan;SONG Yimin;HE Zhijie;ZHU Chenli(School of Civil Engineering,North China University of Technology,Beijing 100144,China)
出 处:《中国矿业》2021年第6期133-139,共7页China Mining Magazine
摘 要:采用相似模拟实验方法进行采空区工作面顶板垮落过程中上覆岩层变形破坏试验研究。以CCD相机构建实验图像数据采集系统,采用数字散斑相关方法对上覆岩层位移场和垮落角进行了分析,研究了上覆岩层垮落区域裂隙演化、位移演化及偏态特征。研究结果表明:工作面顶板垮落过程中上覆岩层垮落角角度随垮落区域形状不断变化,垮落高度逐渐减小直至平稳,垮落面积逐渐增大直至平稳;在竖直方向上,上覆岩层垮落带呈宽缓的W型沉降、裂隙带和弯曲下沉带呈V型沉降;在水平方向上,下部上覆岩层向两侧移动、上部岩层向中间移动,造成各岩层间发生摩擦滑动,并对两侧未开挖区域及煤柱产生弯矩作用;工作面顶板跨落后形成偏态,开切眼侧垮落角大于开采侧垮落角,并在开采侧形成岩移角,开切眼侧的下沉曲线较陡、工作面侧下沉曲线较缓。根据实际工程背景,计算了地表塌陷影响范围,为煤矿开采对上覆岩层影响范围和程度以及后续采空区治理等问题评估提供了必要依据。The deformation and failure test of the overlying strata during the roof collapse of the working face in the goaf is carried out by a similar simulation experiment method.A CCD camera is used to construct an experimental image data acquisition system,and digital speckle correlation methods are used to analyze the displacement field and collapse angle of the overlying strata,and the evolution of cracks,displacement evolution and skewness characteristics of the overlying strata collapsed area are studied.The research results show that the angle of the overburden strata angle changes continuously with the shape of the collapsed area,the height of the collapse gradually decreases until it becomes stable,and the area of the collapse gradually increases until it becomes stable.In the vertical direction,the collapse zone of the overburden layer exhibits a wide“W”type settlement,and the fissure zone and the curved subsidence zone exhibit a“V”type settlement;in the horizontal direction,the upper and lower overburden strata move to both sides,and the upper strata move to the middle,which will cause frictional sliding between the rock layers and produce bending moments on the unexcavated areas and coal pillars on both sides.The roof of the working face is skewed after lagging behind.The fall angle on the side of the cut is greater than that on the mining side,a rock shift angle is formed on the mining side,and the settlement curve is slow.According to the actual engineering background,the impact area of the surface collapse is calculated,which is coal mine mining has provided the necessary basis for the assessment of the impact range and degree of overlying rock strata and subsequent governance of mined-out areas.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49