苎麻骨基复合材料制备与阻燃抑烟特性分析  

Preparation of ramie bone-based composite and analysis of flame retardant and smoke suppression characteristics

作　　者：张嘉文 刘俊怀 何惠 刘意 何玉琴[1] 张红[1] 吴庆定[1] ZHANG Jiawen;LIU Junhuai;HE Hui;LIU Yi;HE Yuqin;ZHANG Hong;WU Qingding(Research Institute of Material Forming Technology,Central South University of Forestry and Technology,Changsha 410004,China)

机构地区：[1]中南林业科技大学材料成形研究所,湖南长沙410004

出　　处：《中国粉体技术》2021年第4期27-35,共9页China Powder Science and Technology

基　　金：湖南省重点领域研发计划项目,编号:2019GK2244;湖南省自然科学基金/常德市联合基金项目,编号:2020JJ6065。

摘　　要：为拓展苎麻资源的高值清洁利用,以苎麻骨粉末为基材,以纳米氧化铜和环氧树脂粉末为强化因子,通过温压成形法制备苎麻骨基复合材料;采用响应面试验设计方法,优化成形工艺参数与强化因子;借助锥形量热仪与扫描电镜等研究苎麻骨基复合材料的阻燃抑烟特性。结果表明,苎麻骨基复合材料的最优工艺参数与最佳强化因子分别为:成形温度为180℃,成形压力为70 MPa,保温保压时间为30 min,环氧树脂质量分数为9.2%,纳米氧化铜质量分数为30.8%;制备的苎麻骨基复合材料强度高、疏水性好,静曲强度高达90.12 MPa,吸水率仅为0.51%;苎麻骨基复合材料具有延迟着火、迟缓火焰扩散、抑制燃烧热释放、抑制烟气释放的能力;其燃烧残余物炭层结构紧凑、致密,可以有效抑制炭层的爆裂。In order to expand the high-value clean utilization of ramie resources,the ramie bone-based composite materials were prepared by warm pressing method with ramie bone powder as base material,as well as nano-copper oxide and epoxy resin powder as strengthening factors.The forming process parameters and strengthening factors were optimized by response surface design method.With the help of cone calorimeter and scanning electron microscope,flame retardant and smoke suppressive characteristics of ramie bone-based composites were studied.The results show that the optimal process parameters and strengthening factors of ramie bone-based composites are as follows:forming temperature is 180℃,forming pressure is 70 MPa,holding time of heat preservation and pressure is 30 min,mass fraction of epoxy resin is 9.2%,mass fraction of nano-copper oxide is 30.8%.Ramie bone-based composite materials have the ability to delay ignition,slow flame diffusion,inhibit combustion heat release,and inhibit smoke release.The structure of the residual carbon layer is compact and compact,which can effectively restrain the bursting of the carbon layer.

关 键 词：苎麻骨基复合材料 阻燃抑烟特性 响应面试验设计法 工艺参数 强化因子 

分 类 号：TB44[一般工业技术]